Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTherma-Tru Impact Windows & Doors in Boulder City: What to Know First
We provide independent Therma-Tru impact windows and doors service in Boulder City, from hard-to-find hardware and weatherstrip to full unit replacement when a panel has lost its seal or taken a hit. Most repair jobs are completed in a single visit, and replacements are quoted on paper before anything is ordered. We won’t quote you a number we haven’t measured for: every estimate is free and written line by line, with the manufacturer warranty terms stated in plain language.
This page is written for Boulder City homeowners who already own Therma-Tru products and want them fixed, upgraded, or replaced by people who know the brand’s quirks. Call (844) 560-0350 and a live person will answer, any hour, any day.
How Therma-Tru Products Fail – and How We Fix Them
Therma-Tru builds a solid door and window system, but nothing survives 20 years of desert sun and monsoon wind without attention. These are the failure modes we see most often on Therma-Tru jobs across Boulder City, and what we actually do about each one.
- Fiberglass entry door skin checking (the Smooth-Star and Classic-Craft lines). Hairline cracks appear along the panel edges after years of UV exposure and the 100°F-plus summer swings we get out here. It looks cosmetic, but water gets behind a checked skin and starts working on the frame. We refinish and reseal the door properly rather than paint over the problem, and we check the slab before assuming a full replacement is needed.
- Door bottom sweeps and weatherstrip flattening on Therma-Tru entry systems. The sweep that keeps monsoon rain and dust out compresses against the threshold over time, so a door that sealed tight in year two whistles and leaks in year twelve. A worn adjustable sill and a rock-hard sweep are usually the whole story. We replace the OEM sweep and sill components so the door closes and seals the way it was engineered to.
- Impact glass seal failure on Therma-Tru impact-rated units. The laminated glass in an impact window holds together, but the perimeter seal around the insulated unit can fail and fog between the panes. That’s a glazing problem, not a frame problem. We confirm whether the sealed unit is still under the Therma-Tru limited warranty before recommending anything, because the right answer is sometimes a warranty claim, not a bill.
- Multi-point lock and handle-set binding on Therma-Tru doors. As the slab settles and hinges wear, the multi-point hardware stops lining up and the door drags or won’t latch. Retrofitting an aftermarket lock set often makes it worse. We adjust the hinges and strike plates first and keep the OEM hardware whenever we can, since the door was cut and drilled for it.
- Impact panel damage after a storm. A cracked or broken impact lite is a safety issue, not a cosmetic one. We source the correct Therma-Tru replacement lite or panel, match the glazing to the original rating, and make sure the unit is reinstalled to hold its impact rating. We won’t substitute a standard pane for an impact-rated one, and we’ll tell you why if someone else offers to.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Therma-Tru Impact Windows & Doors Process
Here’s how a Therma-Tru job runs from the first call to the sweep-up.
- 1
Diagnose before quoting. We look at the actual failure, not just the symptom. A door that won’t latch isn’t always a lock problem; a foggy window isn’t always a glazing problem. We measure every opening twice.
- 2
Check the warranty picture first. Both Therma-Tru warranty layers get reviewed before we recommend a fix. If a part is covered, we say so. If it isn’t, we tell you why, in writing.
- 3
Decide OEM versus quality aftermarket, out loud. For hardware, sweeps, sills, and glazing, we lay out the OEM-versus-aftermarket trade-off on paper. OEM parts fit Therma-Tru’s own tooling and protect the warranty; a good aftermarket part sometimes costs less and lasts the same. You choose with the facts in front of you.
- 4
Do the work. Background-checked, uniformed technicians on every job. We treat your home the way we’d treat our own mother’s, drop cloths and all.
- 5
Test it, not just eyeball it. We operate the door or window, check the seal, and make sure the impact rating is intact before we call it done.
- 6
Register both warranty layers before we leave. Both manufacturer warranty layers get registered in writing with durations stated, so there’s no paperwork fight later. That’s The Keystone Standard, and it backs our 90-Day Done Right Promise.
What Therma-Tru Impact Windows & Doors Costs in Boulder City
We won’t hand you a number before we’ve seen the opening. Here are the ranges Boulder City homeowners typically see. Every figure is a free estimate away from being exact.
| Common Therma-Tru scenario | Typical range |
| Hardware adjustment, hinge tune, or strike-plate realignment | $120 – $260 |
| Door sweep, weatherstrip, and sill replacement (OEM parts) | $180 – $340 |
| Sealed impact glass unit replacement (single pane) | $320 – $700 |
| Full Therma-Tru impact window replacement, per unit | $700 – $1,400 |
| Full Therma-Tru impact entry door replacement | $2,200 – $4,800 |
What moves the price: the size and configuration of the opening, whether the sealed unit is still under warranty, OEM versus aftermarket parts, and whether we’re pulling permits for a full replacement. No surprise line items on the bill, ever.
Call (844) 560-0350 for your free estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Boulder City Homeowners Call TruePane Windows & Doors Boulder City for Therma-Tru Work
We’re not the cheapest bid in the room. We’re the last call you make on a window or door. Every job carries our 90-Day Done Right Promise, backed by The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. If it’s not done right, we make it right, with no arguing and no fine print that covers neither.
A live person answers the phone 24 hours a day, every day. Our technicians have up to 18 years of experience, and they know Therma-Tru’s specific hardware, glazing, and warranty structure. When we’re working on your home in Boulder City, we work like we plan to be in town in thirty years, because we do.
Therma-Tru is one of the brands we handle directly. We also service PGT, CGI, CWS, and ES Windows, so if your Therma-Tru job needs a part we can’t source, we’ll tell you straight instead of leaving you hanging. We’re an independent Therma-Tru service provider, not affiliated with or authorized by Therma-Tru, and we’ll say that plainly.
FAQs
We review both Therma-Tru warranty layers before we recommend any fix, and if a part is covered we tell you so. We register both layers in writing with durations stated before we leave, so there’s a paper trail. Call (844) 560-0350 and we’ll walk through what your warranty does and doesn’t cover.
Yes, we can source OEM Therma-Tru parts for most lines, and we’ll always present the OEM-versus-quality-aftermarket choice on paper. OEM parts fit Therma-Tru’s own tooling and protect the warranty; a good aftermarket part sometimes costs less and lasts the same. You decide with the facts in front of you.
It depends on what’s failing. A bad sweep, worn sill, or binding multi-point lock is almost always a repair. A sealed impact unit that’s fogged between the panes, or a door skin that’s checked past sealing, usually points to replacement. We diagnose before we quote and tell you which way we’d go.
Most repair jobs are completed in a single visit. Full unit replacements are quoted in writing first and scheduled after you’ve approved the order, and we don’t leave a second appointment hanging. For an exact read on your job, call (844) 560-0350.
Yes. We service Therma-Tru alongside PGT, CGI, CWS, and ES Windows, so if your job needs a part from one of those lines, we’re set up to handle it. It’s one call either way: (844) 560-0350.
Get a Free Estimate on Your Therma-Tru Job in Boulder City
If you’ve got a Therma-Tru door that binds, a window that fogged, or a unit that hasn’t been looked at since the last storm, call us. We quote on paper, register both warranty layers before we leave, and back the work for 90 days under The Keystone Standard. No-hassle upfront pricing, a live person on the line 24/7, and a free estimate to start. Call (844) 560-0350 today.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.