A TruePane company - serving Boulder City, NV
T

Therma-Tru Impact Garage Doors in Boulder City, NV

Impact garage doorsImpact garage doors
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Entry doorsEntry doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

Therma-Tru Impact Garage Doors: The Boulder City Owner’s Guide

We install and service Therma-Tru-compatible impact garage doors for Boulder City homeowners, and a typical installed replacement runs roughly $1,850 to $4,600 depending on door size, wind-load rating, and whether the opening needs reframing or a new track assembly. Boulder City sits in a high-wind zone where impact-rated assemblies are held to stricter anchorage and glazing standards than inland Clark County, so the part and the installation matter equally. Most owners discover the failure the same way: the door starts binding on one side in July, a hinge pulls loose from the stile, or the bottom seal leaves a visible gap you can see daylight through.

Call (844) 560-0350

Which Therma-Tru Models This Applies To

Therma-Tru builds impact garage doors and entry systems in several product families, and the part you need depends on which family and which series your door belongs to. The model and series label is usually on a sticker inside the jamb or on the door’s top rail, and the label lists the exact series, size, and wind-load rating. Bring us the label text or a clear photo of it. Sizes are not universal: a Therma-Tru stile profile and hinge pattern from one series will not fit another, even when the door looks identical from the driveway. This is the most common compatibility gotcha we run into in Boulder City, where original doors from the mid-2000s and newer replacements sit on the same street.

We source genuine Therma-Tru replacement components when they are available. When a part is discontinued or back-ordered, we quote a quality aftermarket equivalent that meets the same impact rating and fit, side by side on paper, so you see exactly what you are buying. We do not stock parts and no part rides on a truck; each order is matched to your door and scheduled. TruePane Windows & Doors Boulder City is an independent service provider and is not affiliated with Therma-Tru.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Signs Your Therma-Tru Impact Garage Door Is Failing

  • Binding or dragging on one side. A worn hinge or a bent track lets the door rack out of square. It shows up first in summer heat, when a slightly loose part lets the panel shift.
  • Hinge screws that back out or spin. Fasteners pull free from the stile when the anchor or stile reinforcement has degraded, usually from moisture or original under-torquing.
  • A gap at the bottom seal with daylight showing. The bottom weather seal and its retainer wear out and stop sealing, which lets in dust, wind-driven rain, and desert grit. In Boulder City that grit then wears the seal faster.
  • Popping, snapping, or a door that will not stay level. A fatigued torsion spring or a stretched cable creates uneven lift and dangerous stored tension. Springs in this climate can fail before their nominal cycle life is up because of heat cycling, so a spring that is only a few years old can still be near failure.
  • Rust, bubbling paint, or a soft stile at the bottom. Water held against the door by a failed seal corrodes the steel or softens the composites, and that damage moves into the frame.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a Therma-Tru-compatible impact garage door replacement in Boulder City, expect $1,850 to $2,900 for a standard single-car opening and $2,800 to $4,600 for a double. Hardware and hinge/section repairs typically run $180 to $480, and a torsion spring or cable replacement runs $220 to $390. The range is driven by door size, impact rating, whether the track and anchors are reused, and whether the opening needs a new bottom retainer or reframing. Our quotes are line-item and upfront, with no surprise additions on the bill. Every job is covered by the 90-Day Done Right Promise, and The Keystone Standard means both manufacturer warranty layers are registered in writing, with durations stated, before the truck leaves the driveway. Our technicians have up to 18 years of experience.

DIY or Call Us?

You can safely check the model label, measure the opening, look for daylight at the bottom seal, and tighten a hinge screw that has backed out. What you should not do yourself is adjust or replace torsion springs and cables. Those parts hold serious stored tension and can injure or kill an untrained person, and an improperly set spring can drop a heavy door. Track realignment and impact-rated hardware swaps also require the door to be re-squared and re-anchored to impact standards, and doing that wrong voids the rating and the warranty. Call (844) 560-0350 and we will match the part to your door, quote it honestly, and complete most of these jobs in a single visit.

FAQs

Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (844) 560-0350
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - TruePane Windows & Doors Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch