Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Custom Windows & Doors in Boulder City: What to Know First
TruePane Windows & Doors Boulder City provides independent PGT custom windows and doors for homeowners who need a specialty size, an irregular opening filled correctly, or a full custom replacement done to the manufacturer’s spec. As an independent PGT service provider, we measure every opening twice, quote the line on paper, and register both warranty layers before we leave. Most custom orders run four to eight weeks from final measure to install day, and we tell you the honest number up front rather than the one that wins the bid.
This page is for the Boulder City homeowner who already owns a PGT product, or is considering one, and wants the install handled by people who work on PGT units week in and week out. Call (844) 560-0350 and a live person answers, any hour.
How PGT Products Fail – and How We Fix Them
PGT builds a good window. What goes wrong in Boulder City is rarely the brand and almost always the opening, the seal, or a part chosen wrong at replacement time. Here’s what we actually find on PGT custom and specialty jobs here.
- WinGuard impact units with creeping seal failure. PGT WinGuard laminated glass is common on homes near the lake and along the higher ridges where wind-driven debris is a real concern. The laminated interlayer can take on a milky haze or edge delamination after years of hard desert sun cycling, and it’s often mistaken for ordinary fogging. We test the seal and the interlayer separately before recommending anything, because a delaminated lite needs replacement glass, not a defog drill.
- Aluminum series with thermal-bridge wear. PGT’s aluminum lines hold up well, but the thermal break between frame sections can loosen or the gasket can shrink in the dry heat, and that shows up as condensation on the interior frame in winter, not the glass. We replace the gasket and re-seat the thermal break rather than selling a whole new unit.
- Custom slider and patio door track wear. On PGT sliding doors, the rollers and the bottom track take the load. In Boulder City’s dust, grit works into the track and the door starts to bind in July when the frame expands. We clean and re-machine the track and swap rollers with the correct OEM profile instead of a universal roller that rides wrong and chews the track.
- Custom-size frames installed out of square. The most common cause of a PGT custom window that leaks or won’t latch isn’t the window – it’s a rough opening that was never true to begin with. Our technicians measure twice and shim to square, because an out-of-true install is exactly what voids a warranty. If the pane is not true, the job is not done.
- Aftermarket hardware on a warranty-sensitive unit. Cheap multipoint locks and aftermarket hinges save a few dollars and cost a warranty claim. On PGT products we use OEM parts where the warranty depends on it and only use quality aftermarket where it’s proven safe, and we tell you which is which on the quote.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our PGT Custom Windows & Doors Process
- 1
The call. A live person answers and books a time. We ask the series, the symptom, and the age of the unit before we arrive so the right parts come with us.
- 2
Diagnostics on site. We measure the opening twice, check the frame for square, test the seal and the hardware, and separate what’s the unit’s fault from what’s the install’s fault.
- 3
The parts decision. We lay out the OEM-versus-aftermarket call on paper, side by side, with the warranty consequence of each stated plainly.
- 4
The work. Custom sizing and install done to spec, background-checked and uniformed technicians, most jobs finished in a single visit.
- 5
The test. We operate the unit, check the latch and the seal, and confirm it’s true before we call it done.
- 6
The guarantee. Both warranty layers registered in writing, durations stated, before we leave the driveway. Backed by our 90-Day Done Right Promise.
What PGT Custom Windows & Doors Costs in Boulder City
Custom work is priced by the opening, so ranges are honest where a single number isn’t. These are the figures we quote in Boulder City most often.
| Scenario | Typical range |
|---|---|
| Custom-size PGT replacement window, single opening, installed | $650 – $1,400 |
| Custom patio or sliding door, standard size, installed | $1,900 – $3,800 |
| Hardware or lock replacement on a PGT unit | $180 – $420 |
| Gasket and thermal-break re-seat, aluminum series | $240 – $500 |
| Impact (WinGuard) glass lite replacement | $500 – $1,200 |
Price moves with the series, the glass package, custom versus stock sizing, and how true the rough opening is. Every quote is a free written estimate with line items, no change orders mid-job. Call (844) 560-0350 to schedule yours.
See the difference
Before
After
Before
After
Before
AfterWhy Boulder City Homeowners Call TruePane Windows & Doors Boulder City for PGT Work
We’re not the cheapest bid, and we don’t pretend to be. We’re the last call you need to make on a window or door. That means a 90-Day Done Right Promise where we make it right with no paperwork fight, The Keystone Standard with both warranty layers registered in writing, and technicians with up to 18 years of experience who know PGT’s lines well enough to tell you when a part is OEM-critical. We’re also an authorized installer for other lines – CGI, CWS, ES Windows, and ECO Window Systems among them – so if a PGT part isn’t the right answer, we say so. A live person answers the phone around the clock, and we plan to be in town a long time.
FAQs
Only if the wrong part or an out-of-true install is the cause. We use OEM parts where PGT’s warranty depends on it and register both warranty layers in writing, so you’re covered on paper. Call (844) 560-0350 and we’ll walk through your unit before any work starts.
For most hardware and gaskets we source the correct part directly; for true custom glass and specialty frames the order runs through the factory line, typically four to eight weeks. We tell you which path applies at the free estimate.
Repair if the frame is true and the seal or hardware is the problem; replace if the frame is out of square or the glass is delaminated. We diagnose on site and give you both numbers in writing so you can decide. Call (844) 560-0350 for an honest read.
Stock-size repairs are usually a single visit; custom orders run four to eight weeks from final measure to install day. We give you the real timeline up front, not the one that wins the bid.
No. We’re an independent PGT service provider, not affiliated with or authorized by PGT. We work on PGT products because we know them well, and we stand behind the work with our own 90-Day Done Right Promise.
Get a Free Estimate on Your PGT Custom Windows & Doors
If you own a PGT unit in Boulder City and want custom windows or doors done right the first time, call (844) 560-0350 for a free estimate. A live person answers any hour, we quote on paper with line items, and we register both warranty layers before we leave. A square deal, done right, and we stand behind it.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.