Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Impact Windows & Doors in Boulder City: What to Know First
We install, replace, and service Mr-Glass impact windows and doors in Boulder City. Most straightforward jobs are completed in a single visit, and larger whole-home window replacements usually run two to three days depending on how many openings are involved. We’re not the cheapest bid you’ll get, and we don’t try to be – we quote manufacturer lines side by side on paper so you see exactly what you’re buying before you sign.
This page is for homeowners who already have Mr-Glass products in the walls or are considering them for the first time – the impact-resistant windows and doors built for regions where the glass has to hold up under real wind load. If that’s you, call (844) 560-0350 and a live person picks up, any hour, any day. We’re an independent Mr-Glass service provider, not affiliated with or authorized by Mr-Glass. What we do is install, repair, and replace their product the way it should have been installed the first time.
How Mr-Glass Products Fail – and How We Fix Them
Impact windows built in the last decade fail for reasons that have less to do with the glass itself and more to do with what’s around it and how it was set. Here’s what we actually see on Mr-Glass jobs across Boulder City, and what we do about it.
- Failed perimeter seals on single hung and double hung impact units. The laminated glass holds fine, but the weatherstripping at the sash-to-frame contact points dries out under Boulder City’s low humidity and relentless UV exposure. You get drafts in winter and dust intrusion in summer before you ever see water. We re-seal with OEM-spec gasketing and check sash square while we’re in there.
- Window sash that binds because the rough opening shifted. Horizontal roller and sliding impact units are the most common culprit. When the rough opening isn’t shimmed and set level at install, the track goes out of true and the sash drags. This shows up in July and August when the frame expands. We reset the track, re-flash the sill, and verify it rolls clean through a full cycle.
- Fogging between the glass panes in vinyl impact windows. That’s a failed insulated glass unit, not condensation you can wipe away. In Mr-Glass vinyl units here, it usually traces back to the spacer or sealant failing after years of thermal cycling between cold desert nights and hot afternoons. We replace the IGU with a matched unit and confirm the argon fill and seal before reinstalling.
- Laminated glass with edge delamination on hurricane impact windows. The PVB interlayer can start to separate at the edge if moisture got behind the glazing bead during install. It looks like a milky haze at the glass perimeter. We pull the bead, inspect the edge, and replace the lite if the lamination has broken down – that’s not a coating problem you can polish out.
- Loose hinges and worn rollers on sliding impact doors. These are wear items, and on heavy impact-rated door panels they carry real weight. When they fail you get sagging, scraping, and a door that won’t latch. We install quality aftermarket hardware rated for the panel weight, or OEM where the line calls for it, and align the door so it closes with one hand.
One thing worth knowing that you won’t read on Mr-Glass’s own site: that fogging IGU failure often looks like a glass defect but is frequently a drain-path problem. If the sill and weep system weren’t set up right at install, water sits in the frame, backs into the seal edge, and the unit fails from the bottom corners up. Replacing the glass without fixing the drainage just starts the clock again.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Mr-Glass Impact Windows & Doors Process
Every Mr-Glass job runs the same way, from the first call to the final walkthrough. It’s how we keep the work done right the first time.
- 1
Diagnose before we quote. We measure every opening twice, check the rough opening, and confirm whether the problem is glass, seal, hardware, or install. No guessing on the phone.
- 2
Decide OEM vs. aftermarket parts – on paper. Some Mr-Glass lines need OEM hardware to keep the warranty intact. On others, a quality aftermarket part rated for the same load is the smarter, cheaper fix. We lay both out, side by side, with what each means for your coverage.
- 3
Do the repair or replacement. Background-checked, uniformed technicians set, flash, and seal the unit to the opening. We work in your home the way we’d work in our own mother’s.
- 4
Test it. Sash cycles, door latch, seal integrity, drainage – every opening gets a full check before we call it done.
- 5
Register both warranty layers. Under The Keystone Standard, both manufacturer warranty layers get registered in writing, durations stated, before the truck leaves the driveway. Backed by our 90-Day Done Right Promise.
- 6
Clean up and walk you through it. No surprise line items on the bill. We show you exactly what we did.
See the difference
Before
After
Before
After
Before
AfterWhat Mr-Glass Impact Windows & Doors Costs in Boulder City
Here are the ranges we see on real Mr-Glass jobs in Boulder City. Your number depends on the line, the opening, and whether we’re replacing glass, hardware, or the whole unit. You’ll get a written, no-hassle upfront quote – free – with no change orders once you approve.
- Failed IGU replacement (fogged glass), single hung or double hung: $320 – $650 per opening
- Re-seal and weatherstripping on impact windows: $140 – $260 per window
- Sliding or horizontal roller realignment and hardware: $180 – $400 per unit
- Full single hung or double hung impact window replacement: $850 – $1,600 per window installed
- Sliding impact door hardware or roller replacement: $250 – $500 per door
What moves the price: the number of openings, the glass spec (heavier laminated panes and higher wind ratings cost more), OEM vs. quality aftermarket hardware, and whether the rough opening needs work. Call (844) 560-0350 to schedule your free estimate – we walk the house and quote it in writing.
Why Boulder City Homeowners Call TruePane Windows & Doors Boulder City for Mr-Glass Work
Boulder City sits in a wind-exposed desert corridor and faces real heat and wind load every year. Impact windows here aren’t decorative – they’re doing a job, and the install has to match the product. We know Mr-Glass lines because we’ve set and serviced enough of them to know where they fail and why. Our technicians have up to 18 years of experience.
We back every job two ways. The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before we leave. And our 90-Day Done Right Promise: if it’s not done right, we make it right – no paperwork, no arguing. Live person answers every call, 24 hours a day, seven days a week.
If Mr-Glass parts availability ever gets tight, we’re not stuck – we also work with PGT, CGI, CWS, and ES Windows, and we quote those lines side by side too. Phrase it simply: a square deal, upfront, from a company that plans to be in town in thirty years. That’s why Boulder City homeowners keep our number.
FAQs
Not if it’s done correctly. The risk comes from using non-standard hardware or disrupting a seal the manufacturer covers. That’s why we check whether OEM parts are required for your specific line before we touch anything, and we register both warranty layers in writing before we leave. Call (844) 560-0350 with your model info and we’ll tell you where you stand.
Yes – glass units and hardware for most current Mr-Glass lines are available, and where OEM isn’t required, a quality aftermarket part rated for the same load is often the better value. Lead times depend on the line and glass spec. Call (844) 560-0350 and we’ll confirm what’s available for your model.
Repair when the frame and glass are sound and only a seal, hardware, or single IGU has failed – that’s often a fraction of replacement cost. Replace when the frame is out of true, multiple units are fogging, or the install itself was the problem. We measure and diagnose before recommending either, so the call is based on your actual openings, not a sales script.
Most straightforward repair and replacement jobs are completed in a single visit. Whole-home impact window projects typically run two to three days. Call (844) 560-0350 and we’ll give you a realistic window for your job when we quote it.
Where the work requires a permit, yes – we handle it and see the inspection through. Replacement of like-for-like units and most repairs don’t need one, but we’ll tell you plainly which applies to your job. Call (844) 560-0350 to schedule your free estimate.
If you’re ready to get your Mr-Glass impact windows and doors done right, call TruePane Windows & Doors Boulder City at (844) 560-0350 for a free estimate. A live person answers, day or night. $50 Off Any Repair Over $250, an $89 Seasonal Tune-Up, and a permanent 5% discount for seniors and veterans.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.