Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Custom Windows & Doors in Boulder City: What to Know First
We provide independent Mr-Glass custom windows and door work in Boulder City, and most jobs run from a single visit for a repair to two to four weeks for a fully custom unit once measurements are confirmed and the order is placed. We’re not the cheapest bid you’ll get, and we won’t pretend to be. Every quote is a written line-item price, both manufacturer warranty layers get registered before we leave, and the work carries our 90-Day Done Right Promise.
This page is for the homeowner who already has Mr-Glass windows or doors on the house, or who is planning a custom opening and wants Mr-Glass specified, and wants to know how those units behave in Boulder City’s particular climate before signing anything. Call (844) 560-0350 and a live person answers, day or night.
How Mr-Glass Products Fail – and How We Fix Them
Mr-Glass builds a solid unit, but desert heat, wind-driven dust, and the temperature swing between a July afternoon and a July midnight work on every window the same way. Here’s what we actually see on Mr-Glass jobs around Boulder City, and what we do about it.
- Fogged insulated glass units (IGUs). The most common Mr-Glass call we get is a seal failure on a dual-pane unit, showing as a hazy band or a fog that won’t wipe away from the inside. It’s the perimeter seal giving up, not the glass itself, and it’s accelerated here because the unit heats and cools more sharply than in a mild coastal climate. We replace the failed IGU rather than the whole sash when the frame is sound, which keeps both the cost and the warranty story cleaner. A common mistake we correct: some shops reseal the glass and call it fixed. It isn’t. Once the desiccant is saturated, the seal has to be replaced, not patched.
- Sliding door roller failure and track wear. On Mr-Glass patio and sliding doors, the symptom is a door that drags, jumps the track, or needs a shoulder to close. The cause is usually flat-spotted rollers combined with a track packed with wind-blown grit, which is a Boulder City reality given how much fine dust moves through here in spring. We replace the rollers, clean and true the track, and check the door still latches square before we call it done.
- Binding frames and sticking sashes. Custom units set into masonry or stucco openings can shift as the building moves with heat. A sash that binds in July and frees up in December is telling you the opening has moved, not that the window is defective. We diagnose whether it’s frame, hinge, or opening, and we adjust or re-set rather than force it and crack the glass.
- Failed weatherstripping and glazing seals. Dust and UV dry out the weatherstripping on Mr-Glass units faster here than most owners expect, and the first sign is a whistle at the jamb on a windy day or fine grit on the sill after a blow. We replace the seals and the glazing gasket. Cheap generic stripping fails again within a season, so we use the correct profile for the line.
- Hinge and hardware wear on doors. Entry and French door hardware on custom Mr-Glass doors wears at the hinge knuckles and the multipoint lock, and the door starts to sag enough that the lock won’t throw. We replace the worn hardware, re-hang and adjust the door, and test the lock through a full cycle so it works with one hand.
We’re an independent Mr-Glass service provider. We’re not affiliated with or authorized by Mr-Glass, and we don’t claim to be. What we do know is how their units are built and where they tend to give out.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Mr-Glass Custom Windows & Doors Process
- 1
Call and a real conversation. A live person answers (844) 560-0350 any hour, any day. We ask what the window or door is doing, when it started, and get the details that point us to the right diagnosis before anyone drives out.
- 2
Diagnostics on site. A background-checked, uniformed technician measures the opening twice, checks the glass, frame, seals, and hardware, and identifies whether the problem is glass, frame, or installation.
- 3
The parts decision, on paper. We lay out OEM parts against quality aftermarket parts side by side, with the price and the warranty difference spelled out, and you choose. No surprise line items later.
- 4
The work. We do the repair or the custom install, most jobs in a single visit, and clean up as we go.
- 5
The test. Every unit gets operated through a full cycle, seals checked, lock thrown, and the opening confirmed true. If the pane is not true, the job is not done.
- 6
The guarantee, in writing. Both manufacturer warranty layers get registered in writing with durations stated before we leave, and the work is covered by our 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Mr-Glass Custom Windows & Doors Costs in Boulder City
These are the ranges we quote in Boulder City for common Mr-Glass work. Every job is priced in writing before we start, and the estimate is free.
| Job | Typical range |
|---|---|
| Failed IGU replacement (dual pane, standard size) | $320 – $720 per unit |
| Sliding door roller and track service | $240 – $480 |
| Weatherstripping and glazing seal replacement | $180 – $420 |
| Door hinge and lock hardware replacement | $260 – $560 |
| Fully custom window or door, supplied and installed | $1,100 – $4,800+ per opening |
What moves the price: the size and glass type of the unit, whether OEM parts are still available for that Mr-Glass line, whether the opening has shifted and needs re-setting, and whether you’re replacing one sash or a whole run. Call (844) 560-0350 for an exact quote. Estimates are free, pricing is upfront, and most repairs finish in one visit.
Why Boulder City Homeowners Call TruePane Windows & Doors Boulder City for Mr-Glass Work
Our technicians have up to 18 years of experience, and they’ve worked on enough Mr-Glass units to know the failure modes before they open the toolbox. We quote manufacturer lines side by side on paper so you see exactly what you’re buying, and both warranty layers are registered in writing before we leave the driveway. The 90-Day Done Right Promise is simple: if it isn’t done right, we make it right, with no paperwork fights and no arguing.
We also service PGT, CGI, CWS, and ES Windows, so a house with a mix of products isn’t a problem for us. Standing offers still apply: $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. We’ll be there when we say, in uniform, prepared, and working in your home the way we’d work in our own mother’s.
FAQs
In most cases, yes, as long as the repair uses compatible parts and doesn’t alter the unit beyond spec. Because we’re an independent Mr-Glass service provider and not an authorized dealer, we don’t activate Mr-Glass’s manufacturer warranty, but we do register both manufacturer warranty layers that apply to the parts we install, in writing, with durations stated, before we leave. We’ll tell you upfront if a repair could affect any existing coverage. Call (844) 560-0350 for an exact quote, and estimates are free.
Often, yes, but it depends on the line and how old the unit is. Some Mr-Glass series have parts still in production, and others require a quality aftermarket equivalent. We lay out OEM versus aftermarket side by side with the price and warranty difference on paper so you can choose. If a part is no longer available, we’ll tell you and offer the closest match with the right profile and ratings. Call (844) 560-0350 and we’ll check your unit.
Repair is usually the right call when the frame and sash are sound and the problem is a failed seal, fogging, hardware, or weatherstripping. Replace the whole unit when the frame is warped, the glass is cracked through, or the opening has shifted enough that it won’t stay true after adjustment. We diagnose which case you’re in on site and give you a written estimate for each path. Call (844) 560-0350 to schedule your free estimate.
Most repairs finish in a single visit. A fully custom window or door usually runs two to four weeks once measurements are confirmed and the order is placed, because the unit is built to the opening. We’ll give you the timeline in writing with the quote so there are no surprises. Call (844) 560-0350 to schedule your free estimate.
No. We quote a written line-item price upfront, and that’s the bill. If we open a wall or track and find something genuinely different, we stop and tell you before any extra work, not after. That’s the square deal: no surprise line items. Call (844) 560-0350 for an exact quote, and estimates are free.
If you’ve got Mr-Glass windows or doors that aren’t behaving the way they should, or you’re planning a custom opening and want the work done right the first time, call TruePane Windows & Doors Boulder City at (844) 560-0350. A live person answers around the clock, the estimate is free, and the pricing is upfront. We’ll be there when we say.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.