Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateES Windows Impact Windows & Doors in Boulder City: What to Know First
We install and replace ES Windows impact windows and doors in Boulder City as an independent ES Windows service provider. A typical impact window or door job here runs about one to three weeks from signed quote to finished install, depending on how many openings you’re doing and how quickly the ES Windows series you want ships. We won’t pretend to be the cheapest bid you’ll get; we quote the actual ES Windows lines side by side on paper and tell you plainly what each one costs before you commit.
This page is for the homeowner who already has ES Windows products in the house, or who has decided on ES Windows and wants the install done right the first time. Impact glazing in Boulder City is its own animal: the desert sun, the summer heat that parks above 105°F for weeks, and the wind that funnels off the McCullough Range all work on a window differently than coastal Florida, where most impact products are engineered and tested. If you’re in Boulder City and weighing ES Windows impact windows or doors, call (844) 560-0350 and a live person will pick up, any hour.
How ES Windows Products Fail – and How We Fix Them
ES Windows builds impact products in South Florida, tested to Miami-Dade and Florida Building Code standards. Bring those windows to the Mojave and the failure patterns shift. Here’s what our technicians actually find in Boulder City homes, and what we do about it.
- Seal and gasket degradation on ES impact single-hung and double-hung units. The EPDM gaskets and weatherstripping that seal an ES impact sash are built for a humid, salt-air climate, not a desert that swings 40 degrees between night and afternoon. After several Boulder City summers the gaskets dry, shrink, and pull away at the corners, and you get dust infiltration and a whistle in a north wind before any water ever shows up. We replace the gaskets with UV-stable material rated for desert exposure, not the coastal-spec original.
- Fogged insulated glass units on ES impact vinyl windows. A failed IGU seal is the most common call we get. On the ES vinyl impact line the spacer system and edge seal are sound, but prolonged heat cycling on a west-facing wall in Boulder City cooks the perimeter seal and moisture gets in. We measure the unit, order a matching impact-rated replacement IGU, and re-set the glazing the same visit where the schedule allows.
- Roller and track wear on horizontal roller and sliding impact doors. The stainless rollers ES uses on its sliding impact doors are good hardware, but desert grit is abrasive in a way beach sand isn’t. Once grit gets into the track the rollers flat-spot and the panel starts dragging or jumping the track. We clean and re-machine the track, then fit new rollers; we don’t just spray lubricant and leave.
- Frame and anchor movement from thermal expansion on ES impact windows. Vinyl and aluminum frames expand and contract hard across a Boulder City day-night swing. When the original install didn’t leave proper expansion clearance, the frame bows and the sash binds or the lock misses its keeper. We reset the frame to spec clearance and re-anchor; patching the symptom without fixing the clearance just moves the problem to next summer.
- Condensation and air leaks at the perimeter after a settled install. Impact windows are heavy, and a frame set without enough shimming settles over the years, opening the perimeter seal. The symptom is a draft at the jamb and condensation on the interior edge in winter. We pull the trim, re-shim and re-seal the opening to manufacturer spec, and re-insulate.
One detail worth knowing that you won’t find on ES Windows’s own site: on the ES impact single-hung, a sash that won’t seat flush at the meeting rail is usually not a sash problem at all. It’s the balance shoe riding up the jamb channel because the frame has racked a few millimeters out of square. Replacing the sash won’t fix it. Squaring the frame will.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our ES Windows Impact Windows & Doors Process
An ES Windows impact job runs the same disciplined sequence every time, whether it’s one window or the whole house.
- 1
Diagnose on site. We measure every opening twice and inspect the existing frame, sill, and flashing before we quote anything. On replacement work we confirm the actual ES series in place so we order the right parts.
- 2
Quote on paper, side by side. We lay out the ES Windows lines that fit your openings and your budget next to each other, so you see exactly what you’re buying and what it costs. No surprise line items.
- 3
Decide OEM versus aftermarket parts. For critical components – the impact glazing unit, the sash balances, the frame anchors – we go OEM ES Windows wherever it’s available, because aftermarket impact glass voids the impact rating and the warranty with it. For gaskets, rollers, and weatherstripping we use quality aftermarket parts rated for desert conditions, which hold up better here than the coastal-spec originals and cost less.
- 4
Install or repair to spec. Background-checked, uniformed technicians set the frame with proper expansion clearance, shim and anchor to manufacturer spec, and seal the perimeter. Every opening measured twice, set once.
- 5
Test every unit. We cycle every sash and slide every panel, check the locks, and look for binding or a missed keeper before we call it done.
- 6
Register both warranty layers and clean up. Before we leave we register the manufacturer warranty and our workmanship coverage in writing, with durations stated. Then we haul off the debris and leave the room the way we found it.
See the difference
Before
After
Before
After
Before
AfterWhat ES Windows Impact Windows & Doors Costs in Boulder City
Impact window and door pricing depends on the series, the opening sizes, and whether we’re replacing or repairing. These ranges reflect what Boulder City homeowners typically see:
- Like-for-like impact window replacement (single opening): roughly $650 to $1,400 per window, installed, depending on ES series and size.
- Full-home ES Windows impact replacement: roughly $18,000 to $40,000 for a typical single-family Boulder City home, with the count and sizes of openings driving most of the spread.
- Impact sliding or patio door: roughly $1,800 to $4,500 installed, depending on width and hardware.
- Failed IGU (fogged glass) replacement: roughly $250 to $600 per unit, depending on size and whether impact-rated glass is required.
- Gasket, roller, or seal repair: most single-opening repairs land $150 to $400.
What moves the price most: the ES series you choose, the number and size of openings, whether the existing framing needs repair, and whether tempered or impact-rated glass is required for a specific opening. Every quote we give is a written line-item quote. Call (844) 560-0350 for a free estimate and we’ll walk your openings with you.
Why Boulder City Homeowners Call TruePane Windows & Doors Boulder City for ES Windows Work
We’re an authorized installer for more than a dozen manufacturer lines, including ES Windows, Andersen, Pella, Marvin, Milgard, and PGT, and we back up our ES Windows work with other impact-rated systems from PGT, CGI, CWS, and ECO Window Systems when a different product fits your opening or budget better. That range matters: we’re not locked into selling you one line, so the recommendation is honest.
Every job carries the 90-Day Done Right Promise: if it isn’t done right, we make it right, with no paperwork and no arguing. Under The Keystone Standard, both manufacturer warranty layers are registered in writing, durations stated, before we leave your driveway. Our technicians have up to 18 years of experience, we measure every opening twice, and a live person answers the phone 24 hours a day. We stand behind the work, the warranty, and the promise, in writing. A square deal, quoted upfront.
FAQs
Will replacing ES Windows impact glass void my manufacturer warranty? Not if it’s done with OEM ES Windows glazing that carries the same impact rating. Aftermarket glass without the matching impact certification voids both the impact rating and the ES warranty layer, which is why we go OEM on glass every time. If we’re not sure an aftermarket unit is rated, we don’t use it. Call (844) 560-0350 and we’ll tell you upfront what your opening needs.
Can you get parts for my ES Windows impact products? Yes, for most current ES Windows lines, including the impact single-hung, double-hung, and horizontal roller series. OEM impact glass and hardware come through ES Windows distribution; gaskets, rollers, and weatherstripping we source in desert-rated aftermarket equivalents that often outlast the originals in Boulder City heat. Lead times vary by part, and we tell you the real window before you commit. Call (844) 560-0350 for availability.
Should I repair or replace my ES Windows impact windows? Repair when the frame, glass, and hardware are sound and the issue is a gasket, roller, or seal, usually a few hundred dollars. Replace when the IGU has failed on multiple units, the frame has racked or settled, or the glass can’t be matched with an OEM impact-rated replacement. On a Boulder City home with several fogged or binding units, replacement usually wins on total cost. Call (844) 560-0350 and we’ll give you both numbers so you can choose.
How long does an ES Windows impact install take in Boulder City? A single window or door is typically a one-day job. A full-home replacement runs several days to a couple of weeks depending on the number of openings and the ES series lead time, which we confirm in writing at quote. You’ll know the schedule before we start, and we’ll be there when we say. Call (844) 560-0350 to book a free estimate.
Are you affiliated with ES Windows? No. We’re an independent ES Windows service provider and installer, not affiliated with or authorized by ES Windows as a manufacturer. We’re an authorized installer for the lines we stock and service, and we tell you exactly which warranty applies to which product in writing.
When you’re ready to get real numbers on ES Windows impact windows or doors for your Boulder City home, call TruePane Windows & Doors Boulder City at (844) 560-0350 for a free estimate. A live person answers every call, day or night, and we’ll walk your openings with you and put the pricing on paper. Standing offers include $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. If the pane is not true, the job is not done.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.