Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCWS Sliding & Patio Doors in Boulder City: What to Know First
We provide independent CWS sliding and patio door service in Boulder City, from roller and track repairs to full replacement of failing door panels. Most repairs are completed in a single visit, and replacements typically run two to four weeks from signed quote to installed door, depending on the CWS series and whether the panel is a stock or custom build. We price upfront and on paper: you’ll see a line-item quote before we touch anything, and the number on the quote is the number on the bill.
This page is written for Boulder City homeowners who already own a CWS door (or several) and want it fixed or replaced by someone who has worked on the brand. We’re an independent CWS service provider, not affiliated with or authorized by CWS. If that’s what you need, call (844) 560-0350 and a live person will pick up, day or night.
How CWS Products Fail – and How We Fix Them
CWS doors hold up well when they’re set true. What we see in Boulder City is rarely a manufacturing failure – it’s installation geometry, heat cycling, and desert grit working on the same few components year after year. Here are the failure modes we run into most on CWS sliding and patio doors, and what we do about each.
- Roller flat-spotting on the CWS vinyl slider series. The tandem rollers under a loaded CWS panel develop flat spots when they sit in one position through hot months, and the door starts to drag and jump near the jamb. We replace the roller assemblies with OEM-spec or a quality aftermarket equivalent, then re-check panel height so the new rollers aren’t carrying a door that’s riding low.
- Track wear from desert grit. Boulder City’s wind carries fine sand, and it collects in the bottom track and grinds the roller tires down faster than in greener climates. The symptom is a door that gets progressively harder to slide over a season or two. Our fix is a full track clean-out and re-lube with the correct dry product (not grease, which grabs grit), plus roller replacement if the tires are already worn.
- Failed weatherstripping and pile seals on CWS patio doors. The pile seal along the meeting stile and the sweep at the bottom compress and tear after several summers of heat. You’ll feel a draft or see daylight at the meeting point. We re-seal with correct-thickness pile and a fresh bottom sweep matched to your door’s reveal.
- Glass seal failure on CWS impact sliding glass doors. A fogged or hazy panel means the IG seal is gone – common on west-facing doors that take the full afternoon sun. In many CWS impact models the sash is serviceable, so we replace the insulated unit rather than the whole door, which keeps your impact rating intact and saves the frame.
- Screen and track alignment on CWS screen doors. Screens that jump the track or bind usually trace back to a bent or worn roller or a slightly out-of-square frame. We true the frame, replace rollers, and re-screen to the correct spline size.
One nuance worth knowing: on older CWS sliders, aftermarket rollers that are “close enough” in diameter often are not close enough in axle height, and the panel rides a few millimeters wrong – which then shows up as a seal leak you can’t see. We measure the original before we order.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CWS Sliding & Patio Doors Process
- 1
Call and diagnostics. A live person answers at (844) 560-0350 and books you in. On site, a background-checked, uniformed technician measures every opening twice and identifies the exact CWS series and the true cause before quoting.
- 2
Parts decision, on paper. We lay out OEM versus quality aftermarket side by side, with the trade-offs spelled out – OEM usually means exact fit and a cleaner warranty story; aftermarket can save money when fit is truly equivalent. You choose.
- 3
The written quote. Line-item, upfront pricing with no surprise line items later.
- 4
The work. Most repairs happen in a single visit. Replacements are scheduled and installed with the panel set true to the frame – the founding rule here is simple: if the pane is not true, the job is not done.
- 5
The test. We slide the door open and closed, check the latch, check for daylight and draft at the seals, and confirm the screen tracks clean.
- 6
The guarantee. Our 90-Day Done Right Promise covers the workmanship – if it’s not right, we make it right, no paperwork fight.
See the difference
Before
After
Before
After
Before
AfterWhat CWS Sliding & Patio Doors Costs in Boulder City
These are the ranges we quote in Boulder City for CWS work. Every job gets a written, line-item estimate before anything starts – estimates are free.
| Job | Typical range |
|---|---|
| Roller replacement on a CWS slider | $150 – $320 |
| Track clean-out, re-lube, and seal refresh | $120 – $260 |
| Impact insulated glass unit (fogged panel) | $380 – $750 |
| Screen door re-screen and roller service | $95 – $220 |
| Full CWS sliding patio door replacement | $1,800 – $3,600 |
| Impact French patio door replacement | $2,900 – $5,200 |
What moves the number: the CWS series, whether the glass is impact-rated, panel size, and whether we can service the existing sash or have to order a new unit. Call (844) 560-0350 for an exact quote – estimates are free.
Why Boulder City Homeowners Call TruePane Windows & Doors Boulder City for CWS Work
We’ve been proudly serving local communities for over 42 years through a second-generation glazier’s heritage, and our technicians have up to 18 years of experience on sliding and patio doors – including CWS. We answer the phone live, 24 hours a day, seven days a week, so you’re talking to a person, not a callback form. Every job carries the 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before we leave. No arguing, no fine print that covers neither.
We’re also an authorized installer for more than a dozen lines, so if a CWS panel is past saving we can quote PGT, CGI, ES Windows, or ECO Window Systems side by side. That’s the whole idea: a square deal, done right, and we’ll be there when we say. Call (844) 560-0350.
FAQs
Properly done repair with the right parts generally does not void a CWS warranty, but poor or wrong-part work can. We follow warranty-safe practices and register any applicable warranty layers in writing before we leave, so you have it documented. Call (844) 560-0350 and we’ll walk through your specific door.
Often yes, and when OEM is no longer available we source a quality aftermarket part that matches the original dimensions exactly – we measure before ordering rather than guessing. Call (844) 560-0350 with your model and we’ll confirm.
Repair if the frame is sound and the issue is rollers, seals, or one glass unit; replace if the frame is racked, the track is worn through, or you’re chasing multiple failures at once. We’ll tell you honestly which makes sense on your door. Call (844) 560-0350 for a free estimate either way.
Most repairs are finished in a single visit; replacements typically take two to four weeks from signed quote to installed door depending on the series and glass. Call (844) 560-0350 and we’ll give you a realistic timeline on your job.
Yes – impact-rated CWS sliders and impact French patio doors are a regular part of what we do, including insulated-unit glass replacement that keeps the impact rating intact. Call (844) 560-0350 to schedule.
Ready to get your CWS sliding or patio door taken care of? Call TruePane Windows & Doors Boulder City at (844) 560-0350 for a free estimate – a live person answers, and we’ll give you a square deal in writing.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.