A TruePane company - serving Boulder City, NV
C

CWS Impact Garage Doors in Boulder City, NV

Impact garage doorsImpact garage doors
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Entry doorsEntry doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

CWS Impact Garage Doors: The Boulder City Owner’s Guide

We install and service CWS-compatible impact garage doors in Boulder City, and an installed replacement typically runs $2,400 to $6,800 depending on door size, wind-load rating, and whether the frame and track need attention. Spring and hardware repairs usually fall in the $180 to $420 range. We quote each job on paper before work starts. Most owners discover the failure the same way: the door opens a foot and stops, the opener strains and reverses, or a panel takes a dent and the door never seals the same at the bottom. The Boulder City wind and summer heat are hard on impact-rated doors, and the parts wear on a predictable schedule once you know what to watch.

Call (844) 560-0350

Which CWS Models This Applies To

CWS builds impact garage doors across several series, and the part that fits one series rarely fits another. Panels, hinges, rollers, and bottom seals are matched to a specific series width and wind-load class. The fastest way to identify what you have is the label inside the door, usually on the top section or the end stile: it lists the series, the wind-load rating, and the date of manufacture. If the label is faded or painted over, we measure the door opening and the panel thickness, and the section weight tells us the class. That matters in Boulder City because CWS impact doors here are commonly rated for the higher wind zones, and a standard panel pulled off a shelf will not meet that rating or fit the stile.

On the OEM-versus-aftermarket question, we’re plain about it. For structural parts (panels, stiles, hinges under load) we go OEM or a rated equivalent that matches the CWS series. For wear items (rollers, bottom seals, weatherstripping) a quality aftermarket part is often the smarter buy. We quote both lines side by side so you see the difference. We don’t claim to stock parts or carry them on a truck; each part is sourced to your model, and we tell you the lead time before you commit.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Signs Your CWS Impact Garage Doors Is Failing

  • The door stops or reverses a foot off the floor. That’s usually a spring that has lost tension or a limit setting that has drifted. In Boulder City, we see it more in late spring as the heat builds and the metal works harder.
  • The door binds or grinds in July. Heat expands the track and the door frame, and a door that was true in January can rub. Worn rollers or a track that’s out of plumb cause the grind.
  • A panel takes a dent and the door won’t seal. Impact-rated panels are stiff by design. Once a panel is bent, the bottom edge won’t sit flat, and you get daylight and dust at the floor.
  • The opener strains or the door feels heavy by hand. A door that’s hard to lift manually is fighting a spring or hinge problem, and the opener is doing work it shouldn’t. That shortens the opener’s life too.
  • Weatherstripping and bottom seals crack and pull away. The desert sun breaks down rubber faster than most owners expect. A failed seal lets in wind-driven dust and rain, which is the whole point of an impact door.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Boulder City, an installed CWS-compatible impact garage door replacement generally lands between $2,400 and $6,800. The range is driven by door size, the wind-load rating your opening requires, panel count, and whether the track, springs, and opener need to be brought up to the new door. Spring and hardware repairs typically run $180 to $420. We quote line items on paper: parts, labor, disposal, and any framing or track work, so there are no surprise line items on the bill. We don’t publish a single flat price because a door priced without seeing the opening is a guess. Every job is covered by our 90-Day Done Right Promise, and both manufacturer warranty layers are registered in writing before we leave. Standing offers include $50 off any repair over $250 and a permanent 5% discount for seniors and veterans. Call (844) 560-0350 for a free estimate.

DIY or Call Us?

Some checks are safe. You can look at the label inside the door, measure the opening, test the balance by hand with the opener disconnected, and see whether the bottom seal sits flat. Where DIY goes wrong with impact garage doors is the torsion spring and the cables. Those are under high tension, and adjusting or replacing them without the right tools and training causes serious injury. We won’t walk you through that, and we’d rather you call. We’ll come out, measure twice, and quote the work on paper. If it’s a wear item you can handle, we’ll tell you. If it’s spring or structural work, let a trained technician do it. Call (844) 560-0350 and a live person answers, day or night.

FAQs

Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (844) 560-0350
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - TruePane Windows & Doors Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch