A TruePane company - serving Boulder City, NV

CGI Door Installation in Boulder City, NV

Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

CGI Door Installation in Boulder City: What to Know First

We install CGI doors in Boulder City as an independent installer, and most single-door jobs are measured, set, and finished in one visit, while multi-door and entry-system replacements usually run two to three days depending on how the opening was framed. Expect a plain number before any work starts: a straightforward CGI entry door installation typically lands between $1,450 and $3,200 installed, and a full entry system with sidelites and a storm door runs higher. We quote on paper, side by side, so you see exactly what the door, the hardware, and the labor each cost.

Call (844) 560-0350

This page is for the homeowner who already has a CGI door, or has decided on a CGI line, and wants it installed by people who have set these doors before and will stand behind the work in writing. If that is you, call (844) 560-0350 and a live person will answer, day or night.

How CGI Products Fail – and How We Fix Them

CGI builds a solid door, and most of the problems we see in Boulder City are installation problems, not manufacturing ones. A door that was set out of square, shimmed wrong, or sealed with the wrong product will fail in ways that look like the door’s fault. These are the five we run into most.

  • Entry doors that bind in July and drag in January. Boulder City swings from desert summer heat to cold winter nights, and a CGI entry door set tight against a jamb with no room for expansion will rub at the strike side by midsummer. We reset the frame to the manufacturer’s reveal tolerance and shim at the hinge points, not the middle, so the door has room to move with the season. This is the single most common CGI callback we see.
  • Water intrusion at the threshold and sill pan. CGI entry and storm doors rely on the sill pan and a proper backer behind the threshold. When a door is set directly on the slab with a bead of caulk and nothing else, wind-driven rain finds the gap and the subfloor or framing wicks it. We pull the door, install a sloped sill pan, and flash the rough opening before the new door goes in.
  • Fogged glass in CGI doors with insulated units. A failed seal lets moisture in and the unit hazes from the inside, and no amount of cleaning fixes it. On a CGI door with a sealed insulated glass unit, the fix is a replacement unit matched to the door’s glazing spec, not a whole new door. We measure the unit, match the spacer and low-E to what CGI specified, and re-glaze on site where the frame allows.
  • French and double doors that no longer meet at the astragal. Double doors sag at the inactive leaf over time, and the gap at the center lets in dust and heat. We re-hinge, adjust the astragal, and confirm the two leaves sit flush before we call the job done.
  • Storm and exterior doors with corroded hinges and falsing hardware. Desert dust and seasonal moisture work on cheap hinges and latch hardware faster than most people expect. On a CGI storm door we replace worn hinges and strike hardware with quality aftermarket parts rated for exterior use, and we leave the OEM hardware in place where it is still sound so the warranty stays intact.
Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Our CGI Door Installation Process

Every CGI job follows the same steps, whether it is one storm door or a full entry system with sidelites.

  1. 1
    Measure and diagnose. We measure the rough opening twice and check the existing frame for square, rot, and water damage before we order anything. Every opening gets measured twice for a reason.
  2. 2
    Parts decision, on paper. We lay out the OEM parts and the quality aftermarket options side by side so you see the price and the trade-off. OEM keeps the warranty clean; aftermarket can save money where the part is not warranty-critical.
  3. 3
    Set the door. We flash the opening, set the sill pan, shim at the hinges and strike, and set the door to the manufacturer’s reveal tolerance. No shortcuts at the frame.
  4. 4
    Seal and finish. We seal the exterior with the right product for desert sun and temperature swing, and we check that the interior trim sits tight.
  5. 5
    Test the door. We open and close it through a full cycle, check the latch, the deadbolt, the weatherstripping, and the threshold seal, and confirm nothing rubs.
  6. 6
    Register the warranty. Both manufacturer warranty layers get registered in writing, with durations stated, before we leave. That is The Keystone Standard.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What CGI Door Installation Costs in Boulder City

These are real ranges for CGI door work in Boulder City. Your exact number depends on the opening, the door line, and what we find behind the trim.

Job Typical installed range
CGI storm or exterior door $650 – $1,400
CGI entry door, single $1,450 – $3,200
CGI entry system with sidelites $3,200 – $6,500
CGI French or double doors $3,000 – $6,800
Hurricane-rated front and entry door $3,500 – $7,500
Replacement glazed unit (fogged door glass) $350 – $850

What moves the price: the door line and finish, whether the rough opening needs framing repair, whether we are pulling a permit, and whether the old door comes out clean or comes out with rot behind it. We quote on paper and the bill matches the quote. Call (844) 560-0350 for a free estimate.

Why Boulder City Homeowners Call TruePane Windows & Doors Boulder City for CGI Work

We are an independent CGI service provider, not affiliated with or authorized by CGI, and we say so plainly. What we bring is a crew that has set these doors and knows where they go wrong, backed by The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, and the 90-Day Done Right Promise on the workmanship. If it is not done right, we make it right, no paperwork fight.

Our technicians have up to 18 years of experience, they are background-checked and uniformed, and most jobs finish in a single visit. We also work on PGT, CWS, ES Windows, and ECO Window Systems doors, so if your home has a mix of brands we can handle the whole set in one trip. A live person answers the phone 24 hours a day, seven days a week.

FAQs

Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (844) 560-0350
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - TruePane Windows & Doors Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch