A TruePane company - serving Boulder City, NV
VLX 100 Series

VLX 100 Pivot Door

Work is performed by our local vetted partner.

Sliding glass doorsSliding glass doors
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

VLX 100 Pivot Door in Boulder City, NV | TruePane Windows & Doors Boulder City

The VLX 100 Pivot Door is a heavy-duty aluminum entry door that swings on a vertical center axis instead of side hinges, which lets it carry oversized glass in a frame that stays narrow and clean. Homeowners in Boulder City search for it when they want an entry that reads as architecture rather than hardware: a tall glass panel, a flush threshold, and a pivot point that makes the door feel almost weightless in the hand. TruePane Windows & Doors Boulder City is an authorized ViewLux installation partner, so we supply the VLX 100 and install it to the manufacturer’s standards, warranty intact. The fit and finish in our desert climate is unforgiving of sloppy work. Call (844) 560-0350 to schedule your free on-site measurement.

Call (844) 560-0350

Product Overview – VLX 100 Pivot Door

The VLX 100 exists for one purpose: to make a doorway feel like a piece of the building rather than a hole cut in a wall. Because it rotates on a vertical center axis, the door doesn’t need the clearance a conventional hinged slab requires, and the pivot carries the load so the frame can shrink down to a 2.56″ profile. The result is glass, glass, and a thin line of aluminum holding it. That’s the design philosophy buyers respond to in Boulder City’s modern and desert-contemporary homes, where a large single entry panel sets the tone for everything behind it.

A pivot door also solves a practical problem. Standard hinged doors top out well before 60″ wide by 120″ tall. The VLX 100 is engineered to reach those dimensions in heavy-duty aluminum, which stays rigid where a lesser frame would rack and bind. The pivot hardware handles the mass of oversized glass, and the aluminum profile resists the sun and heat cycling that Boulder City throws at exterior openings year after year. In neighborhoods like the hillside pockets above Lake Mead and the newer custom builds around Boulder City’s edges, that combination of span and stiffness is the whole reason people specify a pivot door.

Who’s it for? People building or remodeling an entry, a poolside opening, or a great-room wall who want one commanding panel instead of a pair of French doors. The VLX 100 works equally well as a front door, a patio opening, or a garden threshold. We install it here because the desert is hard on exterior joinery, and a door this size only performs if the setting and sealing are right. Call (844) 560-0350 and we’ll talk through whether the VLX 100 suits your opening before you commit to anything.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Technical Specifications

Spec Detail
Frame wall thickness 0.098″ aluminum
Profile width 2.56″ (slim sightline that keeps glass dominant)
Maximum size Up to 60″ wide × 120″ tall per leaf
Operation Vertical center-axis pivot
Glass options Clear, Frosted, Obscure, Low-E, Tempered, Laminated
Finish options Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
Thermal performance Thermal break technology, NFRC-rated
Installation standard AAMA 2400/2410 compliant
Perimeter sealing AAMA 812 low-expansion foam on all joints
Impact option Impact-resistant laminated glass available

The numbers do the talking here. A 2.56″ profile with a 0.098″ wall gives the VLX 100 its stiffness without a chunky frame, and the pivot system is what lets a 120″-tall leaf turn smoothly. We’ll confirm exact sizing against your rough opening during the free measurement.

Performance Features

Thermal Efficiency – The VLX 100 uses thermal break technology to separate the inside face of the aluminum from the outside face, so summer heat doesn’t conduct straight through the frame. Paired with Low-E glass, the assembly is NFRC-rated for energy performance. In Boulder City’s 100°F-plus summers, that breaks the difference between a comfortable great room and a hot one.

Acoustic Performance – Laminated glass plus a tight perimeter seal cuts outside noise considerably. That matters near busy roads and near the lake where boats and wind carry sound. The pivot door’s airtight installation method keeps the sound path sealed around the entire frame, not just the hinge side.

Airtightness & Weather Seal – AAMA 812 low-expansion foam seals every perimeter joint for a continuous barrier. Combined with gasketing around the leaf, the door resists the dust and fine grit that desert wind drives against exterior openings. An airtight door is also a door that doesn’t whistle or rattle in a gust.

Waterproofing – The system is rated for water resistance, and the sill and perimeter sealing do the real work. A pivot door with a properly built, correctly sloped sill sheds rain and pool splash away from the threshold. We test the finished installation with a water test before we call the job done.

Wind Resistance – The VLX 100 is wind-load rated for local climate requirements, which matters for tall glass panels exposed to desert gusts. The heavy-duty aluminum profile and pivot anchoring hold the leaf stable rather than letting it flex. We anchor to the structure, not just the finish.

Security & Hardware – A heavy pivot leaf with quality locking hardware gives a solid, dead-feeling lock, and the frame’s stiffness resists the sort of prying that lighter doors allow. We install to AAMA 2400/2410 standards so the locking points line up precisely, which is most of what makes a door secure.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Color & Glass Options

Six finishes cover the range from sharp modern to warm and organic. Premium Black is the most requested for contemporary entries in Boulder City, where dark frames read as intentional against stucco and stone. Anodized Silver and Champagne suit lighter, more understated homes. Pure White works on crisp modern builds and anything near the water where people want a clean, bright look. Bronze disappears into shaded facades and desert tones. Teak Wood brings warmth and pairs well with traditional and desert-contemporary architecture.

On glass, Clear maximizes the oversized-panel effect. Low-E is the sensible default for Boulder City’s sun. Frosted and Obscure give privacy at a bath or side entry. Tempered adds safety, and Laminated – available impact-resistant – is the pick near the lake and anywhere you want security and quiet. We’ll help you match finish and glass to your home during the estimate.

Installation by TruePane Windows & Doors Boulder City in Boulder City

A pivot door lives or dies by its installation. The independent professionals we work with in Boulder City follow a set process every time, because a door this heavy and this precise has no room for guesswork. It starts with a pre-install inspection of the rough opening – checking the framing is true, the header is adequate, and the sill will shed water correctly. Then the door goes in level, plumb, and square, set and shimmed so the pivot axis sits exactly where it belongs. Get that wrong and the leaf drags, the seals gap, and the warranty conversation gets ugly fast.

From there we apply AAMA 812 low-expansion foam sealant to all perimeter joints for a continuous airtight seal, and the whole installation is carried out to AAMA 2400/2410 standards. We finish with a water test to confirm the sill and perimeter shed correctly, then a full cleanup so you’re left with a working door and no debris. The reason we insist on this is simple: improper installation voids the manufacturer warranty. A pivot door set out of square by a fraction will fail long before its time, and no warranty covers that. Professional installation is what protects your investment.

Boulder City has its own considerations. The extreme summer heat and dry air stress seals and finishes, so sun exposure and Low-E glass choice matter here. Exterior openings need wind-load capacity for desert gusts. And if your project touches the building envelope, we work to local permit and code requirements so the installation passes inspection. That installation discipline is the authorized-partner advantage of working with TruePane Windows & Doors Boulder City.

Frequently Asked Questions – VLX 100 Pivot Door

What is the lead time for the VLX 100 Pivot Door? Lead time depends on the size, finish, and glass you choose, since each VLX 100 is built to order. Custom finishes and laminated glass add time. We confirm an accurate lead time once your measurements and selections are locked in – call (844) 560-0350 to start the process and get a real timeline.

Does the VLX 100 qualify for energy tax credits? It can, when specified with NFRC-rated thermal-break construction and qualifying Low-E glass, which is why we spec energy performance on purpose. Eligibility depends on current federal and local programs and your specific configuration, so we’ll walk you through qualifying options during your estimate. Call (844) 560-0350 to review your choices.

What warranty comes with the Pivot Door? The VLX 100 carries the ViewLux manufacturer warranty, and it stays valid only when the door is installed to their standards – which is exactly how we install it in Boulder City. We’ll provide the specific warranty terms for your configuration in writing. Call (844) 560-0350 with questions.

Can I customize the size? Yes, within the maximum span of 60″ wide by 120″ tall. We measure your rough opening on site and order the door to fit, so the pivot axis and seals land correctly. Oversized or unusual openings are where the free measurement matters most – call (844) 560-0350 to schedule yours.

How do I maintain aluminum frames? Aluminum frames need very little care – wipe them with a mild soap and water solution a couple of times a year, and clean the glass with a standard glass cleaner. Avoid abrasive pads. Check the perimeter seal and pivot hardware annually. If anything feels off, call us and we’ll take a look. Call (844) 560-0350 for maintenance guidance.

Get a Quote – VLX 100 Pivot Door in Boulder City

Ready to price a VLX 100 Pivot Door for your Boulder City home? Call (844) 560-0350 to schedule your free on-site measurement and start your project. We’ll confirm your opening size, walk through finish and glass options, and give you a written quote – no pressure, no surprises. The estimate is free, and it’s the right first step before you commit.

Written by the team at TruePane Windows & Doors Boulder City.

Bring This System Into Your Home

Factory-direct pricing, free in-home measurement, certified installation in Boulder City.

(844) 560-0350
Call Now - 24/7 Dispatch
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - TruePane Windows & Doors Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch