A TruePane company - serving Boulder City, NV
VLX 80 Series

VLX 80 Awning Window

Work is performed by our local vetted partner.

Sliding glass doorsSliding glass doors
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

VLX 80 Awning Window in Boulder City, NV | TruePane Windows & Doors Boulder City

The VLX 80 Awning Window is a top-hinged aluminum window made by ViewLux and installed across Boulder City by our team. The sash cranks outward from the bottom, so you can leave it open during a monsoon downpour and still get airflow without water coming in. It’s the window people ask for on covered patios, stairwells, kitchens and anywhere a casement would swing into a walkway. As an authorized ViewLux installation partner in Boulder City, we handle the measuring, the AAMA-compliant install and the warranty paperwork in one project. Aluminum frames with a thermal break hold up in Boulder City’s desert heat far better than typical vinyl. Call (844) 560-0350 to schedule a free on-site measurement.

Call (844) 560-0350

Product Overview – VLX 80 Awning Window

The VLX 80 is built around a simple idea: a window should vent a room without letting in weather. The top-hinged sash pushes out and down, which means rain runs off the glass instead of into the opening. That single detail is why awning windows show up so often on Boulder City homes with covered porches and on the leeward side of houses where afternoon winds kick up dust.

Architecturally, the VLX 80 fits two roles. Stacked in a column, it reads as a clean vertical band of glass on modern stucco and stone elevations. Set high on a wall above a slider or a kitchen counter, it does the quiet work of moving hot air out of a room. The narrow 1.97-inch profile keeps sightlines tight, so you get more glass and less frame.

The engineering matters as much as the look. The frame is aluminum with a thermal break separating the interior and exterior faces, which stops the frame from conducting desert heat straight into the room. Wall thickness runs 0.079 inch, so the extrusion has real mass behind it. Buyers in Boulder City choose this series because it handles the local mix of intense sun, dry air and sudden rain without the warping and color fade that cheaper frames show after a few summers. It’s a window you install once and stop thinking about.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Technical Specifications

  • Frame material: Aluminum with thermal break
  • Wall thickness: 0.079″
  • Profile width: 1.97″
  • Operation: Top-hinged awning, crank-operated sash
  • Glass options: Clear, Frosted, Low-E, Tempered, Laminated
  • Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
  • Screen options: Fixed Screen, Retractable Screen
  • Performance: NFRC-rated thermal performance, AAMA 2400/2410 installation compliance, AAMA 812 perimeter foam sealant, impact-resistant laminated glass available, wind-load rated to local requirements

Every unit we order for a Boulder City project is configured to the opening, not trimmed from a stock size. That means the glass package, finish and screen type are all specified before the window is built.

Performance Features

Thermal Efficiency
The thermal break is a barrier between the inner and outer aluminum faces, so the frame doesn’t pull outside heat into the room the way a solid aluminum extrusion does. Paired with Low-E glass, the assembly is NFRC-rated, which gives you a tested number to compare rather than a sales claim. In Boulder City’s summer heat, that difference shows up on the power bill.

Acoustic Performance
Awning windows seal on all four sides when the sash closes against the frame, which gives them an edge over sliders for sound. Laminated glass adds a dampening layer that takes the sharp edge off road noise and equipment hum. For homes near Boulder City’s highway corridor or a busy nearby street, that’s a real quality-of-life upgrade.

Airtightness & Weather Seal
Air leaks are where efficiency quietly disappears. The VLX 80 uses a continuous gasket system and is installed to AAMA 2400/2410 standards, with AAMA 812 low-expansion foam sealant run around every perimeter joint. That foam fills the irregular gap between frame and rough opening, which is exactly where drafts and dust get in on a typical install.

Waterproofing
The top-hinged design sheds water by geometry: rain hits the glass and runs down and away from the opening. Combined with the perimeter seal and a properly flashed sill, the window is rated for wind-driven rain. Boulder City gets sudden storm cells that dump a lot of water in a short window of time, and this is the configuration that handles them.

Wind Resistance
Frames are wind-load rated to meet local requirements, and the 0.079-inch wall thickness gives the extrusion stiffness under gust loading. Boulder City sits in an area where spring and summer gusts are routine. A window that flexes under load will eventually leak; this one holds its shape.

Security & Hardware
The crank mechanism and multi-point sash lock keep the window secured in the closed position. Because the sash opens outward and only partway, the opening is narrower than a casement’s swing, which limits access from outside. Tempered or laminated glass adds another layer of resistance on ground-floor windows.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Color & Glass Options

Finish is where Boulder City buyers spend the most time, and it’s worth it. Premium Black frames suit modern desert contemporary homes and read sharp against light stucco. Pure White is the safe, bright choice for traditional elevations and interiors that need light bounce. Anodized Silver holds a clean metallic look that doesn’t chip or peel. Bronze blends into shadowed walls and is a common pick for homes backing onto open desert. Champagne adds warmth without going dark. Teak Wood gives a wood-grain look with aluminum durability, useful on homes where vinyl woodgrain has faded.

On glass, Clear is the baseline. Low-E is the default recommendation for Boulder City’s sun exposure and pairs with the thermal break for real efficiency. Tempered belongs anywhere within reach of a door or floor. Laminated adds impact resistance and sound control. Frosted works for bathrooms and sidelights where privacy matters more than the view.

Installation by TruePane Windows & Doors Boulder City in Boulder City

A window is only as good as the install behind it, and this is where a lot of Boulder City projects go wrong. Factory warranty coverage depends on proper installation. Set a VLX 80 out of level or skip the perimeter sealant, and you can void the manufacturer’s warranty on a product you just paid for. That risk is why we handle installation in-house rather than handing it to whoever’s available.

Our process starts with a pre-install inspection of the rough opening: checking for rot, framing damage, and whether the existing flashing and sill are sound. From there we set the window level, plumb and square, shim it correctly, and fasten per the manufacturer’s schedule. We run AAMA 812 low-expansion foam sealant around every perimeter joint, then complete the install to AAMA 2400/2410 standards. Before we call it done, we do a final water test at the frame and sill, check the sash operation and lock, and clean up the site.

Boulder City has its own considerations. The desert climate means big day-night temperature swings that work on sealants and framing, so the perimeter seal has to be done right the first time. Local building requirements around egress and wind loading shape how we specify glass and anchoring. We pull what’s needed and make sure the finished install passes inspection.

Frequently Asked Questions – VLX 80 Awning Window

What is the lead time for the VLX 80 Awning Window?
Lead time depends on the glass package and finish you choose, since each unit is built to your opening. Standard configurations typically move faster than custom sizes or specialty glass like laminated or frosted. Once we measure on site, we give you a firm timeline in writing before you commit. Call (844) 560-0350 and we’ll walk through current lead times for your project.

Does the VLX 80 qualify for energy tax credits?
It can, depending on the glass package and how the full assembly is rated. The thermal break and NFRC-rated performance are what make a unit eligible, and Low-E glass strengthens the case. Qualification rules change, so we confirm the specific ratings on your order before you buy. Call (844) 560-0350 and we’ll go over the NFRC numbers with you.

What warranty comes with the Awning Window?
The VLX 80 carries the ViewLux manufacturer warranty on the frame, glass and hardware, and that coverage is conditional on proper installation. We install to AAMA standards specifically to keep that warranty intact, and we provide the documentation with your project. Call (844) 560-0350 for the current warranty terms on your configuration.

Can I customize the size?
Yes. Each VLX 80 is built to the measured opening, so width and height are set to your wall rather than trimmed from a stock size. We measure on site, confirm the configuration, and order to spec. Custom sizing also lets you match existing window bands in older Boulder City homes. Call (844) 560-0350 to schedule a measurement.

How do I maintain aluminum frames?
Aluminum frames need very little upkeep: wipe them down with mild soap and water a few times a year, and clear dust from the sill and drain paths so water can escape. Check the gaskets and the crank annually, and lubricate the operator sparingly. Avoid abrasive cleaners on anodized and painted finishes. Call (844) 560-0350 if a sash starts sticking or a seal looks worn.

Get a Quote – VLX 80 Awning Window in Boulder City

If you’re pricing the VLX 80 Awning Window for a Boulder City home, start with a free on-site measurement. We’ll confirm your opening sizes, help you pick glass and finish, and give you a written quote with no surprise line items. Installation follows AAMA standards and keeps your factory warranty intact. Call (844) 560-0350 to schedule your free estimate and get your project moving.

Written by the team at TruePane Windows & Doors Boulder City.

Bring This System Into Your Home

Factory-direct pricing, free in-home measurement, certified installation in Boulder City.

(844) 560-0350
Call Now - 24/7 Dispatch
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - TruePane Windows & Doors Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch