Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTherma-Tru Impact Garage Doors: The Boulder City Owner’s Guide
We install and service Therma-Tru-compatible impact garage doors for Boulder City homeowners, and a typical installed replacement runs roughly $1,850 to $4,600 depending on door size, wind-load rating, and whether the opening needs reframing or a new track assembly. Boulder City sits in a high-wind zone where impact-rated assemblies are held to stricter anchorage and glazing standards than inland Clark County, so the part and the installation matter equally. Most owners discover the failure the same way: the door starts binding on one side in July, a hinge pulls loose from the stile, or the bottom seal leaves a visible gap you can see daylight through.
Which Therma-Tru Models This Applies To
Therma-Tru builds impact garage doors and entry systems in several product families, and the part you need depends on which family and which series your door belongs to. The model and series label is usually on a sticker inside the jamb or on the door’s top rail, and the label lists the exact series, size, and wind-load rating. Bring us the label text or a clear photo of it. Sizes are not universal: a Therma-Tru stile profile and hinge pattern from one series will not fit another, even when the door looks identical from the driveway. This is the most common compatibility gotcha we run into in Boulder City, where original doors from the mid-2000s and newer replacements sit on the same street.
We source genuine Therma-Tru replacement components when they are available. When a part is discontinued or back-ordered, we quote a quality aftermarket equivalent that meets the same impact rating and fit, side by side on paper, so you see exactly what you are buying. We do not stock parts and no part rides on a truck; each order is matched to your door and scheduled. TruePane Windows & Doors Boulder City is an independent service provider and is not affiliated with Therma-Tru.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your Therma-Tru Impact Garage Door Is Failing
- Binding or dragging on one side. A worn hinge or a bent track lets the door rack out of square. It shows up first in summer heat, when a slightly loose part lets the panel shift.
- Hinge screws that back out or spin. Fasteners pull free from the stile when the anchor or stile reinforcement has degraded, usually from moisture or original under-torquing.
- A gap at the bottom seal with daylight showing. The bottom weather seal and its retainer wear out and stop sealing, which lets in dust, wind-driven rain, and desert grit. In Boulder City that grit then wears the seal faster.
- Popping, snapping, or a door that will not stay level. A fatigued torsion spring or a stretched cable creates uneven lift and dangerous stored tension. Springs in this climate can fail before their nominal cycle life is up because of heat cycling, so a spring that is only a few years old can still be near failure.
- Rust, bubbling paint, or a soft stile at the bottom. Water held against the door by a failed seal corrodes the steel or softens the composites, and that damage moves into the frame.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Therma-Tru-compatible impact garage door replacement in Boulder City, expect $1,850 to $2,900 for a standard single-car opening and $2,800 to $4,600 for a double. Hardware and hinge/section repairs typically run $180 to $480, and a torsion spring or cable replacement runs $220 to $390. The range is driven by door size, impact rating, whether the track and anchors are reused, and whether the opening needs a new bottom retainer or reframing. Our quotes are line-item and upfront, with no surprise additions on the bill. Every job is covered by the 90-Day Done Right Promise, and The Keystone Standard means both manufacturer warranty layers are registered in writing, with durations stated, before the truck leaves the driveway. Our technicians have up to 18 years of experience.
DIY or Call Us?
You can safely check the model label, measure the opening, look for daylight at the bottom seal, and tighten a hinge screw that has backed out. What you should not do yourself is adjust or replace torsion springs and cables. Those parts hold serious stored tension and can injure or kill an untrained person, and an improperly set spring can drop a heavy door. Track realignment and impact-rated hardware swaps also require the door to be re-squared and re-anchored to impact standards, and doing that wrong voids the rating and the warranty. Call (844) 560-0350 and we will match the part to your door, quote it honestly, and complete most of these jobs in a single visit.
FAQs
Springs and cables typically last six to ten years here, while hinges and bottom seals last longer but wear faster in a high-heat, dusty climate. Heat cycling and grit shorten the life of moving parts, so we inspect the whole assembly rather than replacing one piece in isolation. Call (844) 560-0350 for a free estimate on the full repair.
Often yes. A single hinge, a bottom seal, or a track adjustment can frequently be repaired without replacing the door, and we tell you plainly when repair is the better value. When the stile or panel is corroded or out of true, replacement is the honest recommendation. Call (844) 560-0350 and we will give you a straight answer.
Most hardware and section repairs are done in a single visit, usually within a few hours, while a full impact door replacement is scheduled and completed in one working day. The exact time depends on the door size and whether the opening needs reframing. Call (844) 560-0350 to schedule a free estimate and a clear timeline.
We match the part to the series and size on your door’s label and order it to fit, quoting genuine Therma-Tru parts and quality aftermarket equivalents side by side when the OEM part is unavailable. No part is carried on a truck; each order is matched and scheduled to your door. We also service PGT, CGI, and CWS products. Call (844) 560-0350 to start with a free estimate.
If your Therma-Tru impact garage door in Boulder City is binding, dropping, or letting in daylight, the part is the easy decision and the installation is where it counts. Call TruePane Windows & Doors Boulder City at (844) 560-0350 for a free estimate, an upfront line-item quote, and a live person on the phone any hour of the day or night. We stand behind it in writing, and we will be there when we say.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.