Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTherma-Tru Custom Windows & Doors in Boulder City: What to Know First
We provide independent Therma-Tru custom windows and doors in Boulder City, installed and serviced by technicians with up to 18 years of experience. Most custom entry and patio door projects run three to six weeks from signed order to final walkthrough, depending on whether your quote pulls from Therma-Tru’s stocked profiles or a made-to-spec line. Pricing is quoted upfront and in writing, with both manufacturer warranty layers registered before we leave, and a custom Therma-Tru door package here typically starts in the mid four figures rather than the low.
This page is for the Boulder City homeowner who already has Therma-Tru product on the house, knows the brand, and needs work done right by someone who can read the spec sheet and the label inside the jamb. As an independent Therma-Tru service provider, we’re not the manufacturer and we aren’t authorized by them, but we work on their products constantly. Call (844) 560-0350 and a live person picks up.
Key Takeaways
- We’re an independent Therma-Tru service provider, not an authorized Therma-Tru dealer or representative.
- Custom Therma-Tru projects typically take three to six weeks once the order is signed.
- Both warranty layers get registered in writing before the truck leaves your driveway.
- Upfront pricing, no surprise line items, and a 90-Day Done Right Promise on the work.
How Therma-Tru Products Fail – and How We Fix Them
Therma-Tru makes a good door. What fails on a Therma-Tru opening is usually the installation, the hardware, or the finish, and each failure announces itself in a particular way. Here’s what we see in Boulder City and what we do about it.
- Fiberglass door slabs that swell and split at the bottom rail. The Therma-Tru fiberglass entry doors we see here are usually the Fiber-Classic and Smooth-Star lines, and the failure is almost always moisture wicking up through an unpainted bottom edge or a sill that wasn’t sloped to drain. Once water gets into the core, the slab can’t be repaired, only replaced. We pull the door, check the rough sill and the threshold for slope and weep, and set the replacement so the same thing doesn’t happen again.
- Bowed slabs and sticking doors on the south and west exposures. Boulder City’s summer heat and the low desert sun loading a west-facing entry are hard on any door. On Therma-Tru steel and fiberglass slabs, that shows up as a door that binds in July and swings free in January. It’s usually a slab that was shimmed too tight at install and now has no room to move. We re-set the frame, correct the shimming, and check that weatherstripping isn’t dragging.
- Sagging slab on the hinge side because the frame wasn’t anchored into solid material. A Therma-Tru door hung in a frame that was fastened into stucco or siding but not into studs will sag within a few years. The slab drops, the lock no longer lines up, and the homeowner gets a deadbolt that won’t throw. We open the frame up, add proper anchors into framing, and re-hang the slab so the hinges plane true.
- Locksets and multi-point hardware that no longer line up. On Therma-Tru Fiber-Classic and American Style doors with multi-point locking, a slightly out-of-square frame will bind the whole mechanism. The deadbolt sticks, or the handle gets stiff, and the homeowner thinks the hardware is failing. Often it’s the frame. We check the frame for square before we touch the hardware, and if the hardware is the problem, we get OEM parts rather than guessing at fit.
- Patio door tracks and rollers on Therma-Tru sliding glass doors. Out here, blowing grit from the desert collects in the bottom track, and the rollers wear faster than they would in a wetter climate. A sliding Therma-Tru patio door that drags or jumps is usually a roller and track problem, not a glass problem. We pull the panel, clean and inspect the track for flat spots, and replace the rollers with OEM-fit parts so the door glides and seals like it should.
One detail worth knowing that you won’t find in a brochure: the model line is stamped or labeled inside the jamb or on the edge of the slab itself. We read that label before we quote, because the right replacement part and the warranty-safe repair path depend on it. Installing an aftermarket part on the wrong Therma-Tru line can void a layer of coverage you paid for.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Therma-Tru Custom Windows & Doors Process
Every Therma-Tru job runs the same way. Here’s what happens from your first call to the walkthrough.
- 1
You call, a live person answers. No voicemail tree, no callback form, any hour of the day. We ask what the door or window is doing and set a time to come out that works for you.
- 2
On-site diagnostics. We read the Therma-Tru label, measure the opening twice, and figure out whether the problem is the slab, the frame, the hardware, or the installation. We don’t guess.
- 3
Parts decision, on paper. We put OEM and quality aftermarket options side by side, and we tell you which one keeps your warranty intact. If a repair would void coverage and a replacement makes more sense, you’ll see that in the quote too.
- 4
The work. Background-checked, uniformed technicians arrive on time and prepared. We protect the floor and the surrounding finishes, and we do the job the way we’d do it in our own family’s home.
- 5
The test. Every door and window gets opened, closed, locked, and checked for air and water intrusion before we call it done. If the pane isn’t true, the job isn’t done.
- 6
The guarantee, in writing. Both manufacturer warranty layers get registered and the durations noted before the truck leaves. Workmanship is covered by our 90-Day Done Right Promise. No arguing later.
See the difference
Before
After
Before
After
Before
AfterWhat Therma-Tru Custom Windows & Doors Costs in Boulder City
Custom Therma-Tru work is quoted to the opening, so no two jobs price the same. Here are the ranges we see for common scenarios so you can plan before you call.
| Scenario | Typical Range |
|---|---|
| Custom Therma-Tru entry door, single, stock profile | $2,400 – $4,800 installed |
| Custom entry door, made-to-spec fiberglass with sidelights | $5,000 – $9,500 installed |
| Therma-Tru sliding patio door replacement | $2,800 – $5,500 installed |
| Hardware, roller, or lockset repair on existing Therma-Tru product | $150 – $600, parts and labor |
| Frame reset, re-hang, or shim correction | $350 – $900 |
What moves the price: whether the door is a stocked profile or made-to-spec, glass options, finish and hardware choices, and whether the existing rough opening needs work. A door hung into solid, square framing costs less than one that needs a frame correction first. Every quote comes with written line items and a fixed price, with no change orders after the fact. Call (844) 560-0350 for a free estimate and an exact number for your opening.
Why Boulder City Homeowners Call TruePane Windows & Doors Boulder City for Therma-Tru Work
A Therma-Tru door is a significant spend, and homeowners here have usually been through one contractor who left a fogged seal or a door that binds in July. We exist to be the last call they have to make. Our technicians bring up to 18 years of experience, measure every opening twice, and put manufacturer lines side by side on paper so you see exactly what you’re buying.
We back every job with The Keystone Standard: both warranty layers registered in writing and durations stated before we leave, and a 90-Day Done Right Promise on the workmanship with no paperwork fight. A live person answers the phone around the clock. We’re also an authorized installer for more than a dozen lines, so if your home has PGT, CGI, CWS, or ES Windows product alongside your Therma-Tru doors, we work on those too. Standing offers: $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.
FAQs
It can if the work is done wrong or with the wrong parts, but a proper repair by a qualified installer using OEM-fit components keeps your coverage intact. We read the Therma-Tru label first and tell you which parts path protects your warranty. Call (844) 560-0350 and we’ll walk through it on your opening.
We source OEM Therma-Tru parts where they exist and use quality aftermarket equivalents only where OEM isn’t made or a better fit is available. We put both options on paper so you choose. Call (844) 560-0350 to start a parts quote.
Repair makes sense when the slab, frame, and glass are sound and the problem is hardware, rollers, or shimming; replace when the slab core is water-damaged or the frame is racked beyond correcting. We diagnose before we recommend. Call (844) 560-0350 for a free estimate and a straight answer.
Custom Therma-Tru projects here typically run three to six weeks from signed order to final walkthrough, depending on whether the profile is stocked or made-to-spec. Repairs on existing product are usually quicker. Call (844) 560-0350 and we’ll give you a real timeline for your opening.
Yes, when a permit is required we handle it and see it through inspection. Custom openings that change the rough-in usually need one; straight replacement often doesn’t. We’ll tell you upfront what applies to your job. Call (844) 560-0350 for a free estimate.
Call (844) 560-0350 to schedule your free estimate. A live person answers any hour, and we’ll quote your Therma-Tru work in writing, with no surprise line items and both warranty layers registered before we leave.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.