Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTherma-Tru Sliding & Patio Doors in Boulder City: What to Know First
We service and replace Therma-Tru sliding and patio doors in Boulder City as an independent Therma-Tru service provider, and most repairs – rollers, tracks, screens, latch and handle hardware – are finished in a single visit. Replacements and impact-rated installations are planned work and quoted on paper before anything is ordered. Sliding door repair typically runs $185 to $420; a full replacement sits higher, and you’ll see exact ranges below.
This page is for the homeowner who already has a Therma-Tru door in the wall, who has watched it drag or leak for a couple of seasons, and who wants it handled correctly rather than cheaply. If that’s you, call (844) 560-0350. A live person answers, every hour of every day.
Key Takeaways
- Therma-Tru sliding doors fail in specific, predictable ways – most often at the rollers and the sill track, not the glass.
- We measure every opening twice and quote brand lines side by side on paper, so the decision is yours.
- Both warranty layers get registered in writing before the truck leaves the driveway, per The Keystone Standard.
- Our work is covered by the 90-Day Done Right Promise.
How Therma-Tru Products Fail – and How We Fix Them
Therma-Tru builds a solid door. What we see failing in Boulder City homes is almost never the panel itself. It’s the hardware and the opening around it, and the desert works on both. Here are the five patterns our technicians run into most.
- Roller collapse on Fiber-Classic and Smooth-Star sliders. The original nylon-tread rollers flatten under a heavy panel after a decade of daily use, and the door starts dragging at the bottom corner. Owners often assume the whole door has sagged. It hasn’t. We pull the panel, inspect the roller housing, and replace with OEM-spec rollers rated for the panel weight rather than the cheapest aftermarket set on the shelf.
- Sill track wear from Boulder City grit. Blowing sand and gravel dust settle into the lower track, and every open-and-close cycle grinds that grit into the track and the roller tread. In homes near the lake side of town, where wind funnels differently than up on the ridges, we see track wear two to three years ahead of what the same door shows in a sheltered yard. We clean, evaluate, and either refinish the track or replace it.
- Weatherstrip and sweep failure at the slam edge. The sweep at the bottom of the operating panel and the jamb weatherstrip dry out fast in low humidity, then crack and let wind-driven dust and summer heat through. This is one of the most common Therma-Tru complaints we hear, and it’s a straightforward fix with the correct profile strip, not a generic peel-and-stick substitute.
- Multipoint latch and handle misalignment. On Therma-Tru sliders with a multipoint lock, the door settles a fraction over the years and the latch stops catching cleanly. Some owners force it, which bends the keeper. We realign the strike and hardware and check the lock engages at every point before we call it done.
- Glass seal fogging on older insulated units. When the seal between panes fails, moisture gets in and the glass fogs permanently. No amount of cleaning fixes it. On a Therma-Tru door still under its manufacturer glass warranty, we document the failure properly so the claim holds up; when it’s past coverage, we quote a replacement glass unit so the frame and hardware you already own stay in service.
On any of these, the panel is heavy, the tracks are sharp, and the glass is unforgiving. We handle the removal and rehang with two technicians and proper lift equipment. It’s not a job to take on alone.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Therma-Tru Sliding & Patio Doors Process
- 1
The call. You reach a live person, day or night. We ask what the door is doing – dragging, leaking air, hard to latch, fogged glass – and set a time we’ll actually keep.
- 2
Diagnostics on site. A background-checked, uniformed technician measures the opening twice, checks the rollers, track, weatherstrip, latch, and glass seal, and tells you what’s actually wrong.
- 3
The parts decision. We lay out OEM parts versus quality aftermarket side by side, with the trade-offs and the price for each on paper. You choose. Nothing gets ordered until you say so.
- 4
The work. Most repairs are done in that same visit. Replacements are scheduled and installed to the manufacturer’s spec, with the opening flashed and sealed properly for our climate.
- 5
The test. We open and close the door through its full travel, check the latch at every point, and confirm the seal and sweep sit right.
- 6
The paperwork. Before the truck leaves the driveway, both warranty layers are registered in writing and the durations are stated. You get a copy. The 90-Day Done Right Promise covers the workmanship.
What Therma-Tru Sliding & Patio Doors Costs in Boulder City
Here’s a realistic picture of what Therma-Tru sliding and patio door work runs in Boulder City. These are ranges from our own quotes, not a national average.
| Job | Typical range |
|---|---|
| Roller replacement (per door) | $185 – $320 |
| Track repair or replacement | $240 – $420 |
| Weatherstrip and sweep replacement | $160 – $290 |
| Latch and handle hardware service | $145 – $275 |
| Replacement glass unit (fogged seal) | $320 – $680 |
| Sliding glass door replacement (standard size) | $1,850 – $3,400 |
| Impact-rated sliding or French patio door | $2,900 – $5,600 |
What moves the number: door width and panel count, whether the glass is impact-rated, OEM versus aftermarket parts, and whether the opening needs new framing or flashing. We give no-hassle upfront pricing and a written line-item quote, so the bill matches the quote. Call (844) 560-0350 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Boulder City Homeowners Call TruePane Windows & Doors Boulder City for Therma-Tru Work
We hear the same story from a lot of Boulder City homeowners: a contractor came out, did the work, and left behind a door that binds every July and a warranty nobody can find. That’s the problem The Keystone Standard was built to end. Both manufacturer warranty layers get registered in writing, with durations stated, before we leave. If something isn’t right in the first 90 days, the 90-Day Done Right Promise means we come back and make it right – no paperwork fight, no fine print.
Our technicians have up to 18 years of experience on sliding and patio door systems, and we’re an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, and Jeld-Wen. If your project calls for PGT, CGI, CWS, or ES Windows instead of a Therma-Tru match, we quote those lines on paper too, side by side, so you see exactly what you’re buying. We stand behind the work, the warranty, and the promise in writing.
FAQs
It can. Therma-Tru’s warranty has limits and conditions, and improper installation or unapproved parts can void coverage. That’s why we use OEM or warranty-safe aftermarket parts and register both manufacturer warranty layers in writing before we leave. As an independent Therma-Tru service provider, we handle the documentation so a future claim holds up. Call (844) 560-0350 for an exact quote – estimates are free.
Yes. We source OEM Therma-Tru parts for rollers, sweeps, weatherstrip, and hardware, and we’ll quote them side by side with quality aftermarket options so you can choose based on cost and coverage. Some aftermarket parts are perfectly good; some aren’t. We tell you which is which on paper.
Repair if the frame, glass, and panel are sound and only hardware or weatherstripping has failed – most roller, track, and latch problems are fixed in a single visit for $145 to $420. Replace if the glass seal is blown and the door is out of warranty, the frame is bent, or you’re moving to impact-rated glass for storm protection. Call (844) 560-0350 and we’ll tell you honestly which side of that line you’re on. The estimate is free.
Most repairs are completed in one visit, usually a couple of hours. Full replacement is planned work – we measure twice, order the correct door, and schedule the install. We give you a firm timeline with the quote and keep to it.
Yes. We install impact sliding glass doors and impact French patio doors, along with screen door installation and replacement, all sealed and flashed for Boulder City’s heat and wind. Call (844) 560-0350 to schedule your free estimate.
Get Your Therma-Tru Sliding Door Handled Right
If your Therma-Tru sliding or patio door is dragging, leaking, fogging, or just not latching the way it used to, the fix starts with an honest look at what’s actually wrong. We measure twice, quote on paper, and stand behind the work in writing. Boulder City is where we work, and it’s where we’ll be when you call back. Reach a live person at (844) 560-0350, day or night, for a free estimate.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.