Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Door Installation in Boulder City: What to Know First
We install doors on Mr-Glass openings in Boulder City, and most single entry or French door jobs are finished in one visit. You’ll get a written line-item estimate before anything is ordered, and the price on that sheet is the price on the bill. We’re an independent Mr-Glass service provider, which means we order the right replacement door and hardware for your existing frame rather than pushing whatever is on a shelf.
This page is for the homeowner whose Mr-Glass door has started sticking, leaking, or flexing in the heat, and who wants it handled once by people who have worked on these frames before. Our technicians have up to 18 years of experience on door and window work. Call (844) 560-0350 and a live person answers, day or night.
How Mr-Glass Products Fail – and How We Fix Them
Mr-Glass doors in Boulder City live through a specific kind of weather: 100-degree summers, single-digit winters at 2,500 to 3,000 feet, and desert wind that drives grit into every track and sill. That cycle finds the weak point in a door long before a coastal installation would show it. Here’s what we actually see in the field.
- Frame bowing on aluminum entry doors. Mr-Glass aluminum series expand and contract hard across a Boulder City summer day. When the rough opening was shimmed too tightly at the hinge side, the frame binds in July and the door starts rubbing the strike plate by August. We reset the frame to the opening, re-shim at proper intervals, and check the door in the afternoon heat before we call it done.
- Top-rail corner separation on the fiberglass entry line. We regularly see the top corner joint lift a hairline gap on fiberglass entry doors after a decade of thermal cycling. It looks cosmetic until you notice daylight at the corner. The fix is not caulk; the panel has to be re-seated and the corner mechanically re-secured, or the leak returns every monsoon.
- Failed sweep and sill seals on sliding and patio doors. Desert dust packs the weep holes and sill track, water can’t drain, and the bottom seal rots flat. You feel the draft in January and assume the glass is bad. It usually isn’t. We clear and re-cut the drainage path and replace the sweep with the correct profile rather than a generic stick-on strip that peels off in one summer.
- Multipoint hardware drift on French and double doors. The active leaf throws fine, but the inactive leaf slips its lock rods out of alignment over time, and then the pair won’t seal tight at the astragal. We re-align the hardware and confirm the two leaves meet flush, because a French door that seals on one side and leaks on the other is doing half its job.
- Aftermarket glass units that void the warranty. We’ve pulled plenty of Mr-Glass doors where a prior installer dropped in an aftermarket insulated unit with the wrong spacer and tint. The seal fails within a couple of years, and the original manufacturer warranty layer no longer covers the door. On our jobs, we order the matching glazing spec and register both warranty layers in writing before we leave.
Every one of these is fixable, and none of them requires guessing. The pattern is almost always the same: an install that ignored how this climate moves a door frame.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Mr-Glass Door Installation Process
Here’s how a Mr-Glass door job runs from the first phone call to the final sweep of the sill.
- 1
The call and the diagnosis. A live person answers and books the visit. On site, we measure every opening twice, check the rough opening for square, and photograph the existing frame and hardware so we know exactly what Mr-Glass product we’re working with.
- 2
The parts decision, on paper. We lay out OEM versus quality aftermarket side by side, with the cost and the warranty consequence of each written down. You see what you’re buying before you commit to it.
- 3
The install. We set the door true to the opening, shim and fasten at proper intervals, and seal the perimeter to handle Boulder City wind and summer heat. Most jobs finish in a single visit.
- 4
The test. We open and close the door, check the latch and lock engagement, confirm the sweep and sill seal, and walk the perimeter looking for daylight and draft. If the pane is not true, the job is not done.
- 5
The warranty registration. Both manufacturer warranty layers get registered in writing, durations stated, before we leave the driveway. No paperwork left for you to chase.
- 6
The cleanup and the handoff. We haul the old door and debris, sweep the sill, and leave you with the written warranty record and our 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Mr-Glass Door Installation Costs in Boulder City
These are the ranges we see for common Mr-Glass door jobs in Boulder City. Your exact figure depends on door size, glazing, hardware, and how much frame correction the opening needs. Every estimate is free and written line by line.
- Entry door installation or replacement: $850 to $2,400
- Hurricane-proof front and entry doors: $1,600 to $4,200
- French and double doors: $1,900 to $5,500
- Replacement door with OEM glazing and hardware: $1,100 to $3,200
- Storm and exterior doors: $700 to $1,900
- Frame correction and realignment add-on: $150 to $450
What moves the number: door size, impact-rated glazing, hardware grade, and whether the rough opening needs correction. We quote manufacturer lines side by side so you’re comparing real options, and the price on the sheet doesn’t change once work starts. Call (844) 560-0350 for a free estimate.
Why Boulder City Homeowners Call TruePane Windows & Doors Boulder City for Mr-Glass Work
We’re not the cheapest bid, and we say so. What we put in writing is this: both manufacturer warranty layers registered before we leave, durations stated, and a 90-Day Done Right Promise on the work with no paperwork fights if something needs a second look. That’s The Keystone Standard, and it applies to every Mr-Glass door we set.
Our technicians are background-checked and uniformed, and they measure every opening twice. On the rare job where Mr-Glass parts aren’t the right answer, we also work with PGT, CGI, CWS, and ES Windows, so you get an honest recommendation rather than a forced fit. A live person answers the phone around the clock, and we’ll be there when we say. If the pane is not true, the job is not done.
FAQs
No, as long as the correct glazing spec and hardware are used and both warranty layers are registered in writing. We register both layers and state the durations before we leave, so there’s no gap to argue about later. Call (844) 560-0350 with your door details and we’ll confirm what your warranty covers.
Yes, we order OEM parts for Mr-Glass doors. On some older hardware, a quality aftermarket match is faster and just as sound, and we’ll show you both side by side on paper so you can decide. Call (844) 560-0350 and we’ll check availability for your specific door.
If the frame is square and only the seal, sweep, or hardware has failed, repair is usually the right call and costs far less. If the frame has bowed or the corner joint has separated, a full door replacement is the honest answer. We’ll tell you which one you’re looking at on the free estimate. Call (844) 560-0350 to book it.
Most single entry and French door installs finish in one visit. Larger doubles or jobs with significant frame correction can run into a second visit, and we tell you which before we start. Call (844) 560-0350 to schedule your free estimate.
No. We quote in writing, line by line, before any door is ordered, and the price on that sheet is what you pay. If we find hidden frame damage during the job, we stop and show you before anything changes. Call (844) 560-0350 for a free estimate.
If your Mr-Glass door is sticking, leaking, or past its seal, we’ll give you a straight read on it and a written price with no surprises. Call (844) 560-0350 for a free estimate from TruePane Windows & Doors Boulder City. A live person answers every call, day or night.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.