Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Window Installation in Boulder City: What to Know First
We provide independent Mr-Glass window installation in Boulder City. Most standard openings – single and double hung, horizontal roller, and fixed picture windows – are measured, set, and finished in a single day, while three-panel sliders and casements on older masonry walls can run into a second visit for trim and stucco work. Our pricing posture is honest and nowhere near the cheapest: we quote manufacturer lines side by side on paper, and we don’t pad the bill or surprise you at the end.
This page is for the homeowner who already has Mr-Glass frames in the wall and needs them set right, or is weighing new Mr-Glass units against their existing openings. We’re an independent Mr-Glass service provider – not affiliated with or authorized by Mr-Glass – and we’ve worked the brand long enough to know its habits. Every job carries The Keystone Standard: both manufacturer warranty layers registered in writing before we leave. Call (844) 560-0350 to schedule a free estimate.
How Mr-Glass Products Fail – and How We Fix Them
Mr-Glass builds a serviceable window, but the lines we see most in Boulder City have predictable weak points once they’ve been in desert sun for a decade. Here’s what actually goes wrong and what a proper installation or re-set does about it.
- Roller degradation on horizontal roller and 3-lite slider units. The steel and nylon rollers in Mr-Glass horizontal roller windows wear flat after years of heat cycling in south- and west-facing walls, and the sashes start to drag and jump the track. The roller isn’t always the culprit – a slightly out-of-square frame from a rushed install preloads the rollers and kills them early. We check square before we change a single roller, then re-set the frame if needed.
- Fogged insulated glass units (IGUs) in picture and fixed windows. Seal failure shows as that milky haze between the panes, most often on the sun-baked fixed and picture units where thermal stress is highest. The frame is usually fine; the IGU has failed. We measure and order a matched replacement unit rather than swapping the whole window.
- Weatherstrip and seal compression on casement and awning windows. Casements and awnings that were set slightly proud or racked in an out-of-level opening lose their gasket compression on the hinge side, and dust and wind-driven rain find the gap. We correct the frame plane and replace the compression seals so the sash seats the way it was drawn.
- Hopper and awning weep and drainage problems. Bottom-hinged hopper and awning units can pool water in the sill track when the weep paths are blocked or the sill wasn’t set with the right back-slope. That water works into the wall and rots the rough opening. We clear the drainage channels and confirm slope before we reinstall.
- Screen and hardware mismatch on re-installs. Pulling a Mr-Glass double hung out and setting a new one means matching the screen track, the balance, and the lock spacing to the existing opening. Aftermarket parts that don’t match the series leave you with a screen that won’t seat or a lock that won’t throw. We spec the correct series parts and show you the OEM-versus-aftermarket choice in writing.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Mr-Glass Window Installation Process
Every Mr-Glass job runs the same way, start to finish, so nothing is left for you to chase down afterward.
- 1
Diagnostics and measurement. We measure every opening twice, check square and level against the existing frame, and identify exactly which Mr-Glass series is in the wall.
- 2
Parts decision, in writing. For each opening we lay out OEM versus quality aftermarket parts on paper – cost, fit, and warranty implications – so you see what you’re buying before we order.
- 3
Installation or re-set. Sashes, frames, and glass go in to spec, plumb and true. On a full replacement we set the unit level, shimmed and flashed correctly.
- 4
The test. We open, close, lock, and cycle every window, check the drainage paths, and confirm the seals seat at the hinge and lock points.
- 5
Warranty registration. Before the truck leaves the driveway, both manufacturer warranty layers are registered in writing with durations stated.
- 6
Cleanup and the 90-Day Done Right Promise. We haul the old materials, leave the rooms as we found them, and back the workmanship for 90 days – if it’s not done right, we make it right, no arguing.
What Mr-Glass Window Installation Costs in Boulder City
Prices vary with the series and size of the opening, but here are the ranges we work from – and we put real line items in the quote so nothing moves once the job starts.
| Scenario | Typical range |
|---|---|
| Single or double hung replacement, standard size | $450 – $850 per opening |
| Horizontal roller or 3-lite slider | $650 – $1,400 per opening |
| Casement or awning, with hardware and seal work | $550 – $1,200 per opening |
| Fixed or picture window, glass and set only | $400 – $950 per opening |
| Fogged IGU replacement (glass only, no frame) | $180 – $450 per unit |
What moves the price: the series and glass package, opening size and shape, the condition of the rough opening, and whether we’re replacing a full unit or re-setting an existing one. Second-story and masonry work on Boulder City’s older block walls add labor. Call (844) 560-0350 for a free estimate – you’ll get a written, line-item quote, and the price you see is the price you pay.
See the difference
Before
After
Before
After
Before
AfterWhy Boulder City Homeowners Call TruePane Windows & Doors Boulder City for Mr-Glass Work
We’re the last call a homeowner needs to make on a window. That means a live person answers the phone every time – not a voicemail tree, not a callback form – so when you call TruePane Windows & Doors Boulder City, you reach someone who can talk you through the job. Our technicians have up to 18 years of experience and measure every opening twice, and they’re background-checked and uniformed, working in your home the way they’d work in their own mother’s.
Our installers know where Mr-Glass locks in and where it fights a square opening, and because we’re an authorized installer for more than a dozen lines, we can give you a straight side-by-side if a Mr-Glass unit is the wrong choice for the opening. We also service PGT, CGI, CWS, and ES Windows when a home has mixed brands. Every job is covered by the 90-Day Done Right Promise and The Keystone Standard, with both warranty layers registered in writing. Done right is the baseline, not the selling point.
FAQs
It can, if the install is done incorrectly – and that’s the part most homeowners don’t find out about until they need it. As an independent Mr-Glass service provider, we install to spec and register both warranty layers in writing, with durations stated, before we leave. Call (844) 560-0350 and we’ll walk you through exactly what’s covered.
Usually, yes, though lead times on discontinued series parts can stretch. When OEM is slow or unavailable, we quote a quality aftermarket equivalent on paper next to the OEM option so you can weigh fit and cost yourself. Call for a free estimate and we’ll tell you what’s realistic for your specific series.
If the frame is sound and only the glass or hardware has failed, repair is usually the square deal – a fogged IGU or worn roller is worth fixing. If the frame is racked, rotted, or the seals are gone throughout, replacement makes more sense. We’ll tell you which you’re facing, honestly.
Most standard single and double hung, roller, and fixed openings are finished in a single day. Casements, three-panel sliders, and second-story or masonry work on Boulder City’s older homes often need a second visit for trim and finishing. Your written quote states the timing up front.
Replacement of like-for-like windows in existing openings typically doesn’t require a permit here, but a change in opening size or a new rough opening can. We’ll tell you clearly what your job needs and handle the paperwork if it applies. Call (844) 560-0350 for a free estimate.
Get Your Mr-Glass Window Estimate
If you’ve got Mr-Glass windows that need setting right or replacing, or you’re weighing new units against existing openings, call TruePane Windows & Doors Boulder City at (844) 560-0350 for a free estimate. We’ll measure every opening, put the options side by side on paper, register both warranty layers in writing, and stand behind the work with the 90-Day Done Right Promise. A live person answers the phone around the clock. If the pane is not true, the job is not done.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.