Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateES Windows Door Installation in Boulder City: What to Know First
We install and replace ES Windows doors in Boulder City as an independent ES Windows service provider, and most single-door jobs are done in one visit. Expect a written line-item quote before anyone touches the opening, and expect the price on that quote to be the price on the bill. Entry door replacements in Boulder City typically run $850 to $3,400 depending on the series and whether the frame is sound, and we tell you which one you have before we order anything.
This page is for the Boulder City homeowner who already has an ES Windows door in the wall, likes the house, and wants the door done right this time. Our technicians have up to 18 years of experience with ES Windows product, and we quote Andersen, Pella, Marvin, Milgard, PGT and CGI side by side on paper so you can see exactly what you are buying. Call (844) 560-0350 and a live person answers, any hour.
How ES Windows Products Fail – and How We Fix Them
ES Windows is a Florida manufacturer, and its doors are built for a different climate than the Mojave. That mismatch is where most of our Boulder City ES Windows work starts. Here is what we find, series by series.
- ES Windows 5000 Series entry doors: hinge-side binding in July. The aluminum frame expands hard when Boulder City pushes past 105 degrees, and an entry door that was hung with standard clearance will drag on the strike side by midsummer. The cause is usually not the door slab. It is a frame set true to a winter opening. We re-set the frame with heat-rated shims and clearance sized for the summer swing, not the day we install.
- ES Windows hurricane-rated front doors: gasket and sweep compression loss. These doors ship with heavy weatherseal built for wind-driven rain. In our dry heat the seal takes a compression set within a few seasons and the door whistles in a spring wind. We replace with a heat-tolerant sweep and gasket, not the OEM part that will do the same thing in three years.
- ES Windows French and double doors: sag at the active leaf. Double doors from any Florida line carry a lot of glass weight on an aluminum hinge stile. We see strike-side sag first, then daylight at the astragal. Our fix is re-hanging both leaves to a shared plumb line rather than chasing the active leaf alone.
- ES Windows storm and exterior doors: threshold weep failure on desert wind events. Weeps built for rain drainage clog with windblown dust and fine sand after a spring gust front. Water and grit then sit in the threshold. We clear and re-orient the weeps and set the sill to shed toward the exterior our way, not the factory’s.
- Replacement doors on older ES Windows openings: mixing OEM and aftermarket parts. An ES Windows frame is not the same extrusion across series, and an aftermarket slab that fits a 5000 will not always seat in an impact line. We measure the actual extrusion before ordering, and we tell you when an OEM part is the only warranty-safe choice and when a quality aftermarket part is the better buy.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our ES Windows Door Installation Process
- 1
The call and the look. A live person answers and we book a time. On site, our technician measures every opening twice, checks the frame for rot and out-of-square, and confirms which ES Windows series is actually in the wall.
- 2
The parts decision, on paper. We quote manufacturer lines side by side and tell you plainly where an OEM part protects your warranty and where an aftermarket part is the smarter money. You see it in writing before we order.
- 3
The install. The old door comes out, the frame is set true to a plumb line with heat-rated shims, the new door is hung and adjusted for the summer swing, and hardware is torqued to spec.
- 4
The test. We open and close the door a full cycle, check the sweep and gasket for even contact, and check the threshold for daylight and water shed.
- 5
The warranty registration. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves the driveway. That is The Keystone Standard.
- 6
The guarantee and the cleanup. Workmanship is covered by our 90-Day Done Right Promise. We haul the old door and all debris away and sweep up after ourselves.
See the difference
Before
After
Before
After
Before
AfterWhat ES Windows Door Installation Costs in Boulder City
Pricing below is a range for a typical Boulder City job. Every quote we give is a fixed line-item price, and there are no change orders once work starts.
| Job | Typical range |
|---|---|
| Single entry door, full replacement, ES Windows series in good frame | $850 – $1,600 |
| Hurricane-rated or impact front door replacement | $1,400 – $2,600 |
| French or double door replacement, both leaves re-hung | $1,800 – $3,400 |
| Storm and exterior door replacement | $750 – $1,500 |
| Hardware, sweep, gasket and threshold work (no new door) | $180 – $450 |
What moves the price: impact versus non-impact glass, frame condition, and whether the extrusion matches an off-the-shelf slab or needs a factory order. Seniors and veterans get a permanent 5% discount, and there is $50 off any repair over $250. Call (844) 560-0350 for your free estimate.
Why Boulder City Homeowners Call TruePane Windows & Doors Boulder City for ES Windows Work
We have proudly served local communities for over 42 years, and TruePane was founded in 2008 by second-generation glazier Dale Kessler on the rule that still runs the shop: if the pane is not true, the job is not done. That heritage is why a Boulder City homeowner calls us for ES Windows work rather than a call center two time zones away.
Our technicians are background-checked and uniformed, trained into journeymen, and they know how an ES Windows frame behaves in a Boulder City July. Every job carries the 90-Day Done Right Promise and The Keystone Standard behind it. And when an ES Windows part is no longer worth ordering, we service PGT, CGI, CWS and ECO Window Systems too, so you are not stuck with one brand to solve one door.
FAQs
Will a new ES Windows door be covered by the manufacturer warranty? Yes, if the door is a genuine ES Windows product and both warranty layers are registered correctly. The factory registers the product warranty; the installer registers the labor warranty. Both get registered in writing, with durations stated, before our truck leaves the driveway under The Keystone Standard.
Can you get ES Windows replacement doors and parts in Boulder City? Yes. As an independent ES Windows service provider we source genuine ES Windows product through authorized channels, and where an OEM part is discontinued or not worth the money we tell you straight and quote a quality aftermarket part instead.
Should I repair my ES Windows door or replace it? Replace the door when the frame is sound but the slab is warped, cracked or leaking air at the glass seal. Repair when the frame and slab are intact and the problem is hardware, sweep or threshold. We tell you which on the free estimate, and we do not push a replacement you don’t need.
How long does ES Windows door installation take in Boulder City? A single entry door is typically a one-visit job, and a double or French door takes longer because both leaves get re-hung and tested. We give you a clear timeline on the quote.
Will the price change once work starts? No. You get a fixed line-item quote, and the price on the quote is the price on the bill. Call (844) 560-0350 for your free estimate.
Call (844) 560-0350 to schedule your free estimate with TruePane Windows & Doors Boulder City. A live person answers any hour, and we’ll be on site when we say we will.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.