Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCWS Custom Windows & Doors in Boulder City: What to Know First
We supply and install custom windows and doors built for CWS openings in Boulder City, with most standard configurations completed in a single visit once measurements are confirmed. Custom sizing takes longer than a stock unit, and we quote it on paper before any order is placed. Pricing is upfront, the estimate is free, and you’ll see the manufacturer lines side by side rather than a single lump number.
This page is for the homeowner who already has CWS in the wall or is ordering CWS and wants the install done right the first time. If that’s you, call (844) 560-0350. A live person answers, day or night.
Key Takeaways
- We’re an independent CWS service provider, not affiliated with or authorized by CWS.
- Custom CWS work in Boulder City is quoted line by line, free, before ordering.
- Every job carries the 90-Day Done Right Promise and The Keystone Standard.
- Live person on the phone 24/7 at (844) 560-0350.
How CWS Products Fail – and How We Fix Them
CWS covers a wide range of product lines, and what goes wrong is usually tied to the series, the hardware package, and the desert swing between cold nights and hot afternoons. These are the failure modes our technicians see most on CWS windows and doors in Boulder City.
- Vinyl frame bowing on west-facing sliders. Boulder City’s summer sun hits 110°F and a sliding patio door on a west wall takes it straight on. Cheaper vinyl profiles bow and the panel drags or binds. We check the frame for square before touching the rollers, because new hardware on a bowed frame just fails again. If the frame has moved, we tell you rather than sell you rollers.
- Failed dual-pane seals and fogging. A fogged unit isn’t a cleaning problem; the seal between the panes has broken and moisture is inside. On CWS units the glazing is often a sealed assembly, so the fix is a replacement sash or IG unit matched to the series, not a re-seal that won’t hold. We quote the correct replacement part against your model.
- Multipoint door lock misalignment. CWS hinged patio and entry doors with multipoint hardware start to resist the handle when the slab settles or the strike plates drift. The temptation is to force the handle. That bends the gearbox. We adjust the keeps and hinges first, and replace the gearbox only when it’s actually worn.
- Weep and drainage channel clogging. In dusty desert conditions, weep holes and sill drainage channels pack with grit. Water then sits against the frame and finds its way inside. We clear and verify drainage on every CWS service call, which is a step most installers skip.
- Screen and track wear from grit. The same dust that clogs weeps wears rollers and screen tracks faster here than in wetter climates. We replace rollers and re-string or re-screen with materials rated for the local conditions, and we lubricate with a dry product that doesn’t collect grit.
One detail worth knowing: on some CWS lines the screen frame and the operating sash share a track tolerance that’s tighter than most brands. A generic aftermarket roller can sit a fraction high and the screen catches. We use the correct profile roller or an exact-match aftermarket, and we test the screen travel before we call the job done.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CWS Custom Windows & Doors Process
Every CWS custom job follows the same steps, from the first call to the final cleanup. Here’s what to expect.
- 1
Call and diagnostics. You call (844) 560-0350 and a live person answers. We ask about the series, the symptom, and the age of the unit so the technician arrives prepared.
- 2
On-site measurement. Our background-checked, uniformed technician measures every opening twice and checks the frame for square, plumb, and level before any custom order is placed.
- 3
Parts decision. Where a part is needed, we lay out the OEM option and a quality aftermarket option side by side on paper, with the trade-offs and the price difference stated plainly. You choose.
- 4
The install or repair. We set the unit or make the repair to the manufacturer’s specification, sealing and flashing to suit Boulder City’s sun and dust.
- 5
The test. Every window and door is operated, checked for drainage, and confirmed to latch and lock before we leave.
- 6
The guarantee in writing. Both warranty layers are registered in writing before the truck leaves the driveway, durations stated.
If something isn’t right inside 90 days, the 90-Day Done Right Promise covers it. No paperwork fight.
What CWS Custom Windows & Doors Costs in Boulder City
Custom pricing depends on the series, the size, the glass package, and whether you’re replacing a unit or ordering new. Here are the ranges we quote most often in Boulder City. These are estimates, not a bid; your written quote is exact.
| Scenario | Typical range |
|---|---|
| Single custom window (standard size, CWS series match) | $450 – $1,100 installed |
| Custom sliding or patio door (per panel) | $1,200 – $3,200 installed |
| Multipoint door hardware replacement | $280 – $650 |
| Fogged IG or sash replacement (per unit) | $180 – $480 |
| Roller, screen, and track service | $120 – $260 |
What moves the price: oversize or non-standard openings, impact-rated or low-E glass, hardware upgrades, and how much frame work is needed. We quote on paper, and the price doesn’t change once work starts. Call (844) 560-0350 for a free estimate with exact numbers for your openings.
See the difference
Before
After
Before
After
Before
AfterWhy Boulder City Homeowners Call TruePane Windows & Doors Boulder City for CWS Work
We’re a second-generation glazier’s operation built on a simple founding rule: if the pane is not true, the job is not done. We’ve served local communities for over 42 years, and we hire local, train apprentices into journeymen, and plan to be here in thirty years. That’s why a live person answers every call, 24/7, and why our technicians are background-checked and uniformed on every job.
On CWS work specifically, we measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before we leave. We’re also an authorized installer for more than a dozen lines, so if a CWS part isn’t the right call, we can show you the alternatives from PGT, CGI, ES Windows, and ECO Window Systems without sending you to another company. Most jobs are finished in a single visit. Pricing is upfront, and the estimate is free.
Standing offers: $50 Off Any Repair Over $250, an $89 Seasonal Tune-Up, and a permanent 5% discount for seniors and veterans.
FAQs
Can you repair a CWS window without voiding the warranty? Yes, when the repair is done to manufacturer specification with correct parts. That’s the whole point of The Keystone Standard: we register both warranty layers in writing before the truck leaves, so the record is clear. Call (844) 560-0350 and we’ll walk your specific warranty through it.
Are CWS parts hard to get in Boulder City? Not for the common lines; we source OEM or exact-match aftermarket parts and tell you which is which. Unusual or older series can take longer, and we say so up front rather than guessing a date. Call for a free estimate and current availability.
Should I repair or replace a fogged CWS unit? If the frame is sound, a sash or IG replacement is usually the smarter money and the range runs $180 – $480 per unit. If the frame has bowed from sun exposure, replacement is often the better long-term call. We measure and show you both on paper before you decide. Call (844) 560-0350 for a free estimate.
Do you install new custom CWS windows and doors, not just repair them? Yes. Custom sizing, ordering, and install are all part of the work, and we measure every opening twice before ordering. Most standard configurations finish in a single visit once the custom unit arrives. Call to schedule your free estimate.
How long does a CWS custom job take? Repairs are often same-visit; custom orders depend on the series and the line’s lead time, which we state on your quote. We don’t promise a date we can’t hold. Call (844) 560-0350 for a free estimate and a real timeline.
Call TruePane Windows & Doors Boulder City
If you have CWS windows or doors and want the work done right the first time, call (844) 560-0350 for a free estimate. A live person answers, day or night, and we’ll quote it on paper with both warranty layers registered in writing. Upfront pricing, most jobs done in a single visit, and a 90-Day Done Right Promise behind every one.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.