Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCWS Window Replacement in Boulder City: What to Know First
We handle CWS window replacement in Boulder City as an independent service provider, and most single-window replacements are done in one visit. Two-story or full-frame jobs usually run two to four days. Our pricing is upfront and itemized on paper, so you see what the frame, glass package, and labor cost before anyone touches a sill.
This page is for the homeowner whose CWS windows have been in the wall since the house went up and who wants the replacement done once, not twice. If that’s you, call (844) 560-0350 and a live person will pick up, any hour.
How CWS Products Fail – and How We Fix Them
CWS windows are built for the region, which means they see a lot of desert sun and a lot of hard water. What fails first depends on the series. Here’s what we run into most in Boulder City:
- Single-hung sash balances on older CWS aluminum series. The constant block-and-tackle style balances stretch and lose tension after years of heat cycling, so the sash drifts down or won’t stay up. We replace the balance hardware, or if the frame is showing its age, we quote a full replacement while the wall is open. This is a case where repair often costs more per window than it should.
- Seal failure and fogging on dual-pane CWS glass. The most common call we get. Boulder City’s summer heat and dry air stress the edge seal, and once moisture gets in, the desiccant is spent. You see a hazy or milky pane you can’t clean. The only real fix is new insulated glass or a new unit. We measure the existing glass pocket and order a matching IGU, or quote a full replacement if the frame is worth replacing.
- Frame sealant drying out on stucco-set CWS units. Stucco moves with temperature swings, and the caulk joint around the perimeter opens up over time. That’s where water finds a way in during a monsoon. We pull the trim, cut back the old sealant, and re-set with a closed-cell backer and exterior-rated sealant before the new unit goes in.
- Spiral or pivot hardware failure on CWS casement and awning series. The operator arm gets stiff from dust and grit, then the gear strips. We replace the operator with an OEM part when it’s available and a quality aftermarket part when it isn’t, and we say which one on the quote.
- Glass-to-frame gasket shrinkage on slider windows. The vertical gasket between the sash and jamb shrinks back, and the sash rattles. We replace the gasket and re-align the rollers, or replace the whole slider where the track is scored.
A word on safety: window replacement is a two-person trade, and a second-story unit in Boulder City needs a proper anchor point and fall protection. This is not a job for a homeowner and a ladder, and we’d tell you the same if you asked us face to face.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CWS Window Replacement Process
The order of operations matters. Here’s how a CWS job runs from your call to our cleanup:
- 1
Phone and site visit. You call (844) 560-0350, and a live person answers. We set a time, and a background-checked, uniformed technician shows up when we said we would.
- 2
Diagnostics. We measure every opening twice, note the CWS series and frame type, and check for rotted sills or water intrusion behind the trim before we commit to a number.
- 3
Parts and product decision. We lay out the OEM path and the quality-aftermarket path side by side, on paper. You pick what fits the budget and the warranty.
- 4
Installation. Old unit out, opening cleaned and re-flashed, new unit set, shimmed, and sealed with exterior-rated caulk.
- 5
Testing. Every operable window gets opened and closed, locked, and checked for square. Glass is checked for fog-free seals at hand-off.
- 6
The Keystone Standard. Both manufacturer warranty layers are registered in writing, with durations stated, before the truck leaves your driveway. Priced as quoted, no surprise line items, no second appointment left hanging.
What CWS Window Replacement Costs in Boulder City
Range depends on size, series, and whether the frame comes out. These are honest numbers for Boulder City, not teasers:
| Job | Typical range |
|---|---|
| Insulated glass (IGU) replacement, single unit | $280 to $650 |
| Insert window replacement in existing frame | $450 to $1,100 per opening |
| Full-frame replacement, including stucco trim work | $900 to $2,200 per opening |
| Vinyl replacement window, standard size | $550 to $1,400 per opening |
| Energy-efficient upgrade with low-E glass | Add $80 to $250 per opening |
What moves the price: second-story access, rotted framing found behind the trim, tempered or impact glass requirements, and the number of openings done at once. A whole-house job on a Boulder City ranch house usually comes out lower per window than a single replacement.
Every estimate is free and written line by line. Call (844) 560-0350 for an exact number on your CWS windows.
See the difference
Before
After
Before
After
Before
AfterWhy Boulder City Homeowners Call TruePane Windows & Doors Boulder City for CWS Work
We’re an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, PGT, CGI, and ES Windows, and we also service PGT, CGI, ES Windows, and ECO Window Systems if your home has mixed brands. That means a CWS job gets quoted with real alternatives in the room, not one path sold hard.
Our technicians have up to 18 years of experience, and every job is backed by the 90-Day Done Right Promise. If something’s off, we make it right, with no paperwork fights. We’re an independent CWS service provider, not affiliated with or authorized by CWS, and we say that up front because you deserve to know who’s standing in your living room. A square deal, in writing, is the whole offer.
FAQs
Not if the replacement carries its own warranty registered in writing. CWS’s warranty covers their original product. Once we replace a unit, the new window’s manufacturer warranty sits on top, and we register both layers under The Keystone Standard before we leave. Call (844) 560-0350 for the details on your specific job.
Usually yes for hardware, and sometimes for glass. OEM parts for older series are getting harder to source. When OEM isn’t available, we use a quality aftermarket part and tell you on the quote which one you’re getting. We don’t swap in a cheaper part and call it the same.
Repair usually wins if only one or two units are fogged and the frames are sound. Replace when the frames show rot, sealant failure, or you’re re-doing more than a third of the windows. We measure and tell you honestly which side of that line you’re on.
A single opening is one visit. A whole house takes two to four days depending on stucco work and access. We don’t promise same-day on planned work, and we set a date and keep it.
Older CWS dual-pane units in Boulder City’s heat cycle through edge seals faster than newer series. Once the desiccant is saturated, you see the haze. A new IGU fixes it in an afternoon. Call (844) 560-0350 for a free estimate on the swap.
Get a Straight Number on Your CWS Windows
Call (844) 560-0350 and a live person answers, day or night. We’ll set a visit, measure every opening, and hand you a written quote with the number you’ll actually pay. If the pane isn’t true, the job isn’t done, and we mean that on CWS work the same as any other.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.