Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Sliding & Patio Doors in Boulder City: What to Know First
We provide independent CGI sliding & patio door repair and replacement in Boulder City. Most jobs are diagnosed on the first visit and finished in a single trip once the right parts are on hand. We quote upfront on paper, and our pricing reflects doing the work correctly – OEM or quality aftermarket parts, both warranty layers registered, and a 90-Day Done Right Promise on the labor – rather than being the cheapest bid in town.
This page is for Boulder City homeowners who already own a CGI door and want it serviced by technicians who know the product line. Our technicians have up to 18 years of experience across sliding and patio door systems. To schedule a free estimate, call (844) 560-0350 and a live person will answer.
Key Takeaways
- CGI sliding and patio doors in Boulder City wear differently than they do on the coast – late-spring desert grit and summer heat drive most roller and weatherstrip failures.
- We are an independent CGI service provider, not affiliated with or authorized by CGI.
- Every job carries The Keystone Standard and the 90-Day Done Right Promise.
- We also service PGT, CWS, ES Windows, and ECO Window Systems.
How CGI Products Fail – and How We Fix Them
CGI builds a solid sliding and patio door, but the failures we see in Boulder City follow patterns tied to specific lines and to how this climate treats them. Here is what our techs look for on a CGI call.
- Roller flat-spotting and hard tracking on older CGI sliders. The tandem rollers on CGI’s standard aluminum sliding systems pick up fine desert grit through the track, and the nylon sheaves flat-spot rather than roll. By July the door drags and no longer seats flush. We pull the sashes, clean and re-flatten the track, and set new rollers adjusted for the correct vertical load so the door glides and latches with a light push.
- Weatherstrip and pile seal failure from heat and UV. CGI’s sliding assemblies rely on pile and foam weatherstrip at the jamb and meeting stile. Boulder City’s intense sun and dry air bake that seal brittle within a few summers, so the door whistles in wind or lets a dust film in. We replace the seal material with a UV-stable profile and check the weep and drain slots that keep monsoon rain moving out.
- Impact slider glass seal creep on CGI impact-rated patio doors. On CGI impact lines, the laminated glass unit can show a hazy band or stress crack along the seal after years of thermal cycling between cool nights and 100-degree days. That is a glazing seal symptom, not a broken frame. We identify whether the unit can be re-glazed in place or needs replacement, and we register the new glass warranty in writing.
- Out-of-square openings on CGI French and multi-panel patio doors. A CGI French patio door hung in an opening that has settled or gone out of square binds at the top corner and the deadbolt stops lining up. The real cause is the rough opening, not the door. We measure the opening on diagonals, correct the shimming and anchoring, and then adjust the panels so the lock engages cleanly.
- Screen door track wear and sag. CGI screen door panels on sliding systems ride a light track that bows under repeated use. We re-tension or replace the rollers, square the frame, and refit the bug seal so the screen seats without gaps at the bottom rail.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Sliding & Patio Doors Process
- 1
Diagnose on site. We measure the opening twice, operate the door through its full travel, and check rollers, track, weatherstrip, glass seal, and frame square. We tell you what is actually failing and why.
- 2
Decide parts – OEM or quality aftermarket. Where a CGI OEM part is the right call for warranty safety and fit, we use it. Where a quality aftermarket roller or seal is equal or better and holds the warranty, we say so on paper and quote the manufacturer lines side by side.
- 3
Quote upfront. You get a written price with no surprise line items. No-hassle, fixed numbers before we start.
- 4
Do the work. Background-checked, uniformed technicians complete most jobs in a single visit, working in your home the way they would in their own mother’s.
- 5
Test and adjust. We cycle the door, check the latch, the seal, and the drain slots, and confirm it moves with a light push before we call it done.
- 6
Register the warranty and clean up. Both manufacturer warranty layers are registered in writing, durations stated, before we leave. Our 90-Day Done Right Promise covers the workmanship – if it is not done right, we make it right, no paperwork fights.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Sliding & Patio Doors Costs in Boulder City
Pricing depends on the CGI line, the part, and whether we can re-glaze in place or replace the whole unit. Here are the ranges we quote most often.
| Job | Typical range |
|---|---|
| Roller replacement and track service (per panel) | $150-$320 |
| Weatherstrip and pile seal replacement | $180-$400 |
| Screen door roller and re-square service | $95-$220 |
| Impact glass unit re-glaze (single panel) | $450-$950 |
| Full sliding glass door replacement (standard) | $1,600-$3,400 |
| Impact French patio door replacement | $2,800-$5,500 |
What moves the price: door size and panel count, OEM versus aftermarket parts, impact-rated versus standard glass, and whether the rough opening needs correcting. Call (844) 560-0350 for a free estimate – a written line-item quote, upfront, no surprises.
Why Boulder City Homeowners Call TruePane Windows & Doors Boulder City for CGI Work
We have proudly served local communities for over 42 years, and we plan to be here in thirty more. That shapes how we handle a CGI door: we register both warranty layers in writing so you never get caught with a fogged seal and a voided warranty. We hire local, train apprentices into journeymen, and answer the phone with a live person 24 hours a day, 7 days a week. We’re an authorized installer for more than a dozen manufacturer lines including Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, CGI, and ES Windows, so if a CGI part is back-ordered or a full replacement makes more sense, we can quote alternatives side by side. Standing offers include $50 Off Any Repair Over $250, an $89 Seasonal Tune-Up, and a permanent 5% discount for seniors and veterans. We also service PGT, CWS, ES Windows, and ECO Window Systems.
FAQs
No, using an independent service provider does not void your CGI warranty when we use the correct parts and register the work in writing. As an independent CGI service provider we document both warranty layers, durations stated, before the truck leaves your driveway, so you have a clear record. Call (844) 560-0350 for a free estimate.
Yes. We source CGI OEM rollers, seals, and glass units when the fit or warranty calls for it, and where a quality aftermarket part is equal or better we quote both side by side on paper. Most parts arrive quickly enough to finish in a single visit. Call (844) 560-0350 and we’ll check availability for your specific line.
Repair usually wins when rollers, seals, or a single glass unit are the problem; replacement makes more sense when the frame is out of square, the glass seal has failed across multiple panels, or you want to upgrade to impact-rated glass. We diagnose on site and tell you honestly which is the better spend. Call (844) 560-0350 for a free estimate.
Most roller, seal, and screen repairs are completed in a single visit, usually within a few hours. Impact glass re-glazing and full door replacements depend on part lead times, which we confirm before scheduling. Call (844) 560-0350 and a live person will answer.
Summer heat expands the aluminum frame and track, and flat-spotted rollers that rolled fine in spring begin to drag. It’s a common Boulder City pattern, and new rollers adjusted to the correct load usually solve it. Call (844) 560-0350 for a free estimate.
Call (844) 560-0350 to schedule your free estimate. A live person answers 24 hours a day, 7 days a week, and every CGI job is done right, quoted upfront, and backed in writing.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.