A TruePane company - serving Boulder City, NV

CGI Impact Windows & Doors in Boulder City, NV

Impact garage doorsImpact garage doors
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Entry doorsEntry doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

CGI Impact Windows & Doors in Boulder City: What to Know First

We provide independent CGI impact windows and doors in Boulder City, and most residential jobs are completed in a single visit once the right parts are on hand. A typical impact window or door replacement runs $1,850 to $6,400 installed per opening depending on the series and size, with repairs like a failed seal or a dragging sash usually landing between $220 and $480. We quote CGI lines side by side on paper, register both manufacturer warranty layers in writing, and back every job with our 90-Day Done Right Promise through The Keystone Standard. This page is for Boulder City homeowners who already own CGI products and want them serviced or replaced correctly by technicians who have up to 18 years of experience. Call (844) 560-0350 for a free estimate.

Call (844) 560-0350

How CGI Products Fail – and How We Fix Them

CGI builds impact-rated windows and doors for a hot, high-sun, wind-blown market, and Boulder City is exactly that market. We’ve seen the same handful of failures come back around on CGI jobs, and each one has a real cause worth naming.

  • Single hung impact units that won’t stay latched. The CGI single hung series shows up often in Boulder City’s mid-century ranch homes. The vent latch and sweep wear faster here because AC cycling pulls the sash against the frame hundreds of times a season. We replace the latch assembly and re-plane the sash track rather than selling a whole unit.
  • Fogged glass on dual-pane impact units. The IGU seal can fail on any brand, but CGI impact glass runs a heavier laminate-and-spacer stack, and when the perimeter seal goes, moisture collects along the bottom edge first. We read the date code, check whether the unit is still inside its manufacturer glass warranty, and quote OEM glass if it is.
  • Horizontal roller sliders that hop the track. CGI horizontal roller and sliding units in Boulder City pick up grit and desert dust in the bottom track, and the original steel rollers flat-spot. We pull the panel, replace the rollers, and reset the track height so the panel glides instead of grinding.
  • Vinyl frames that bow in July. CGI vinyl impact windows are rated for the heat, but a dark-colored frame on a west-facing wall takes real load. When the frame bows, the sash binds and the lock won’t engage. We check frame square against the rough opening before touching hardware, because re-hanging a sash in a bowed frame just moves the problem.
  • Weep holes packed with stucco and dust. Consequence of a previous re-stucco job, not the window. Clogged weepers trap water against the sill and rot the framing behind it. We clear and re-establish drainage and inspect the sill flashing while the unit is open.

One detail CGI’s own site doesn’t tell you: the OEM glass on their double hung impact line carries a date-coded label tucked behind the interior stop, and that code is what the manufacturer uses to honor a glass claim. If a previous installer threw that label away during a re-glaze, the glass warranty is effectively void, which is why we photograph the code before any work begins.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Our CGI Impact Windows & Doors Process

Every CGI job follows the same steps, whether it’s a single repair or a full opening replacement.

  1. 1
    Diagnose on site. We measure every opening twice, check frame square, read the date codes and model plate, and confirm whether the failure is glass, hardware, frame or installation.
  2. 2
    Decide OEM versus quality aftermarket. If the unit is under warranty, we go OEM for anything structural – glass, sash, frame. For wear parts like rollers, latches and sweeps, we quote a quality aftermarket option alongside the OEM part so you see the price difference on paper.
  3. 3
    Quote side by side. You get a written line-item quote before we touch anything, with no change orders later.
  4. 4
    Do the work. Background-checked, uniformed technicians, drop cloths down, weather-sealed, sealed against Boulder City’s wind-driven dust.
  5. 5
    Test every opening. Operate the sash and lock, check drainage, run the water test on doors.
  6. 6
    Register the warranty and clean up. Both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. The 90-Day Done Right Promise on the workmanship backs it all up.

What CGI Impact Windows & Doors Costs in Boulder City

Here’s what CGI work actually runs in this market. All figures are installed, labor included, and these are the ranges we see on real Boulder City jobs, not a national average.

Scenario Typical cost
Single hung or double hung impact window, installed $1,850 – $3,400
Horizontal roller or sliding impact window $2,400 – $4,800
Impact patio or entry door, installed $3,200 – $6,400
IGU glass replacement (factory sealed unit) $380 – $920
Hardware repair – rollers, latches, sweeps $220 – $480

What moves the price: frame size, whether the opening is stucco or block, whether the wall needs reframing, and whether you choose OEM glass or a warranty-safe aftermarket replacement. Full-impact whole-home packages run higher but we quote each opening individually so you see where the money goes. Call (844) 560-0350 for a free estimate and a written line-item quote.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Boulder City Homeowners Call TruePane Windows & Doors Boulder City for CGI Work

As an independent CGI service provider, we are not affiliated with or authorized by CGI, and we’re not the cheapest bid in the room. We’re the last call you need to make on a window or door. Our technicians have up to 18 years of experience, they measure every opening twice, and they quote the manufacturer lines side by side on paper so you can see exactly what you’re buying. We’re an authorized installer for more than a dozen manufacturer lines – including PGT, CWS, ES Windows and ECO Window Systems – so if a CGI part is back-ordered or discontinued, we have a real alternative in hand, not an excuse. A live person answers the phone 24 hours a day, seven days a week. And every job carries the 90-Day Done Right Promise: if it’s not done right, we make it right, no paperwork and no arguing. If the pane is not true, the job is not done.

FAQs

Ready for a Free Estimate?

If you own CGI windows or doors in Boulder City and want them serviced or replaced by a team that registers the warranty and stands behind the work, call TruePane Windows & Doors Boulder City at (844) 560-0350. A live person answers around the clock, and your estimate is free, upfront, and in writing. A square deal, done right the first time.

Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.

Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (844) 560-0350
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - TruePane Windows & Doors Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch