Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Impact Windows & Doors in Boulder City: What to Know First
We install, replace, and service PGT impact windows and doors in Boulder City as an independent PGT service provider, and most replacement jobs run two to four weeks from signed quote to final inspection because PGT builds impact units to order. A single window or door replacement usually takes one day on site. Pricing is quoted line by line on paper before anything is ordered, so you see the unit cost, the glass package, and the labor as separate numbers rather than a lump sum.
This page is for the homeowner who already has PGT impact windows or doors on the house, or who has decided on PGT and wants to know what the work actually involves in Boulder City. Call (844) 560-0350 and a live person will pick up, day or night.
How PGT Products Fail – and How We Fix Them
PGT builds a good impact unit. What fails in southern Nevada is usually not the frame or the glass, it’s the seals, the hardware, and the setting of the unit in the wall. Here are the patterns our technicians see most often on PGT jobs around Boulder City.
- Fogged glass on PGT WinGuard aluminum units. The insulated glass seal breaks down and moisture clouds the panes from the inside. In Boulder City this shows up faster on west-facing windows, where afternoon sun pushes the glass edge past 150°F and works the perimeter seal harder than the manufacturer’s desert testing accounts for. The fix is a full insulated glass unit replacement, not a defog drill-and-reseal, because a drilled unit loses its impact rating.
- Failed corner welds and water intrusion on PGT vinyl frames. Vinyl expands and contracts more than aluminum, and on PGT Vinyl impact sliders and single hungs the sealant at the sill corners can open up after several summers. We see staining on the drywall below the sill before the homeowner notices anything at the window itself. We reset the sill pan, re-flash, and reseal with a product rated for desert UV rather than a standard painter’s caulk.
- Stiff or dragging horizontal rollers on PGT impact sliders. The roller assemblies on sliding impact units carry much more weight than standard glass, and the original rollers wear flat. Homeowners often think the whole door needs replacing. It usually doesn’t. We replace the rollers with OEM or equivalent-rated hardware and re-track the panel so it rolls the way it did when the house was new.
- Broken or gapped weatherstripping on PGT double hungs. Impact units use a heavier, thicker weatherstrip than standard windows, and when it compresses or tears the window whistles in a spring wind. That’s worth fixing before monsoon season, because a whistling window is a leaking window waiting for rain. We replace the full weatherstrip run, not just the visible torn section.
- Out-of-square openings that were never true from the start. This is the one that surprises people. An impact window set into an opening that’s out of square by even a quarter inch will bind, leak, or crack a seal within a few years regardless of brand. We measure every opening twice and shim and square the frame before the unit goes in. If it was set wrong last time, we fix the opening, not just the window.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our PGT Impact Windows & Doors Process
- 1
The call. A live person answers, not a machine. We ask what the window or door is doing and set a time to look at it.
- 2
Diagnostics on site. We measure every opening twice, check the frame for square, look at the flashing and sill pan, and test the hardware. On a fogged unit we check whether the seal failure is in the glass or the frame, because the fix is different.
- 3
The parts decision, on paper. Where PGT OEM parts are available we quote them. Where a quality aftermarket part meets or beats the OEM spec, we show you both side by side with the price difference. You decide, not us.
- 4
The install or repair. Impact units get set square, shimmed, flashed, and sealed with UV-rated product. Most single-window jobs are done in one visit.
- 5
The test. We operate every window and door, check the lock and the screen, and confirm the unit closes flush and seals.
- 6
The guarantee and the warranty paperwork. Before we leave, both manufacturer warranty layers are registered in writing with durations stated, and the 90-Day Done Right Promise covers the work.
See the difference
Before
After
Before
After
Before
AfterWhat PGT Impact Windows & Doors Costs in Boulder City
These are the ranges we quote on PGT impact work in Boulder City. Every job gets a written line-item quote before anything is ordered, and the number on the quote is the number on the bill.
| Job | Typical range |
|---|---|
| Replace one fogged insulated glass unit (PGT impact) | $450 – $900 |
| Replace roller or hardware on one impact slider | $180 – $400 |
| Weatherstrip and reseal one impact double hung | $150 – $350 |
| Sill pan and flashing repair below one impact window | $300 – $700 |
| New PGT impact single hung or double hung window, installed | $900 – $1,900 per window |
| New PGT impact sliding or horizontal roller window, installed | $1,200 – $2,600 per unit |
| New PGT impact patio door, installed | $2,800 – $5,500 |
What moves the price: the glass package (laminated impact glass costs more than tempered), the size of the opening, whether the old unit comes out cleanly or the framing needs repair, second-story access, and whether you choose OEM parts or an equivalent-rated aftermarket part. Call (844) 560-0350 for a free estimate. The quote is written line by line, and the price doesn’t change once the work starts.
Why Boulder City Homeowners Call TruePane Windows & Doors Boulder City for PGT Work
We’re an authorized installer for more than a dozen manufacturer lines, PGT among them, and we’re an independent service provider rather than a PGT dealer, so we quote what’s right for the house instead of what’s on the truck. Our technicians have up to 18 years of experience, they’re background-checked and uniformed, and they measure every opening twice because the second measurement is the one that catches the error. We’ve proudly served local communities for over 42 years, and our founder, a second-generation glazier, built the company on one rule: if the pane is not true, the job is not done.
Every PGT job is covered by the 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before we leave. We also handle CGI, CWS, ES Windows, and ECO Window Systems, so if your home has a mix of brands we can look at all of them in one visit. A live person answers the phone 24 hours a day, 7 days a week.
FAQs
No, as long as the replacement unit is a PGT impact-rated assembly and the installation follows the manufacturer’s installation instructions. The failure that voids coverage is a non-impact-rated glass unit put into an impact frame, or an install that skips the flashing requirements. We use PGT-rated glass on PGT frames and register the warranty in writing before we leave so the coverage is documented.
Usually, yes. PGT has supplied impact windows across southern Nevada for years, and most hardware and weatherstrip parts are still available through the manufacturer. When a specific part has been discontinued, we source an equivalent-rated aftermarket part and show you the spec and the price side by side before you decide. Call (844) 560-0350 and we’ll tell you what your unit needs.
Repair if the frame and hardware are sound and only the glass or seal has failed. Replace if the frame is cracked, the opening was set out of square, or more than one unit in the same wall is failing at once, which usually means the whole installation was done wrong. We diagnose on site and give you the honest answer, even when the cheaper answer is the one you need.
A single window or door is usually done in one day. A full-house order takes two to four weeks from signed quote to install because PGT builds impact units to order, then two to four days on site for the install depending on the count.
Yes, when the job requires one under Boulder City code, and the inspection is part of the job, not an extra. We tell you at the estimate whether a permit applies to your address and window count so the timeline is clear up front.
No. We’re an independent PGT service provider and an authorized installer for PGT and more than a dozen other manufacturer lines, including Andersen, Marvin, Milgard, and CGI. We’re not the manufacturer and we don’t claim to be. Call (844) 560-0350 for a free estimate and we’ll walk you through what your specific PGT unit needs.
If you have PGT impact windows or doors in Boulder City that are fogged, leaking, stiff, or you’re ready to replace them, call TruePane Windows & Doors Boulder City at (844) 560-0350. A live person answers every hour of every day. We’ll schedule a free estimate, measure every opening twice, quote PGT parts and any equivalent on paper, and back the work with the 90-Day Done Right Promise and The Keystone Standard, both warranty layers registered in writing before we leave.
Written by the team at TruePane Windows & Doors Boulder City, serving Boulder City and nearby areas.