Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateWhy Boulder City Homeowners Choose CGI Windows & Doors
TruePane Windows & Doors Boulder City is an independent CGI service provider: we diagnose, repair, and install CGI vinyl windows and doors for homeowners here, and we do it without any manufacturer tie that pushes you toward a new unit. What sets our CGI work apart is familiarity with the specific parts that fail in this climate, from Sentinel Series balances to horizontal roller tracks, and an honest read on whether a repair will actually hold. We’re a second-generation glazier’s company, licensed and insured, and a live person answers our phone 24 hours a day at (844) 560-0350. We are not affiliated with or authorized by CGI.
Why Trust TruePane Windows & Doors Boulder City for Your CGI Windows & Doors?
Our technicians have up to 18 years of experience, and a good share of that has been spent on CGI products: vinyl hung windows, horizontal rollers, impact units, and patio sliders. That matters because CGI windows fail in brand-specific ways. A Sentinel double-hung that won’t stay up usually needs a balance and pivot shoe, not a new sash. A roller window that chatters is a track and wheel job, not a frame replacement. Knowing the difference is what keeps your money in your pocket.
We fit CGI OEM or exact-match aftermarket parts so the unit keeps its original dimensions and warranty position. Every job runs under The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before we leave. For 90 days after, our Done Right Promise covers the work, no paperwork fights and no arguing. That same standard applies whether we’re repairing one balance or setting a whole run of new CGI units in a Boulder City cottage.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Common CGI Windows & Doors Problems We Fix in Boulder City
Boulder City’s high-desert sun and 100°F-plus summer afternoons punish vinyl windows harder than milder climates do. Here’s what we see most often on CGI units around the original townsite and the mid-century ranches on the outskirts.
- Bowed or separated sash corners on Sentinel single- and double-hung windows. Years of intense south- and west-facing sun load softens vinyl and works at the welded corners, so sashes warp just enough to bind in the frame. Once a sash binds, the seal stops making contact and you get drafts at the jamb.
- Worn balance hardware and tilt-pivot latches. A CGI hung window that slams shut or won’t stay up is almost always a balance or pivot shoe that has dried out and lost tension. This is the single most common CGI call we get, and it’s a hardware fix, not a window replacement, when the frame is square.
- Roller and track wear on horizontal roller and 3-lite slider windows. Desert dust works its way into the bottom track and grinds the rollers down. You feel it as hard sliding and track chatter, and you see it as air and water leaks because the panels no longer seat tightly against the weatherstrip.
- Glazing seal failure and fogging between the panes. The sealed unit inside your CGI window has a perimeter seal that breaks down faster under heavy UV and heat cycling. Once it goes, you get the foggy look and the insulating value is gone. That’s a glass-pack swap, and it’s worth doing before the frame is compromised.
- Weatherstrip breakdown at the frame. CGI vinyl units use felt and bulb weatherstrip that sun-bakes and flattens. A quick check on a windy Boulder City afternoon tells you a lot: if you can feel air moving at the meeting rail or jamb, the weatherstrip is done and needs replacing to keep the unit sealing and your energy bill in check.
CGI Parts & Our Repair-vs-Replace Approach
CGI windows are worth repairing when the vinyl frame is sound and the glass is intact. We use CGI OEM or exact-match aftermarket balances, rollers, weatherstrip, glazing seals, and pivot hardware, sourced per job rather than carried in stock. That means we order the right part for your specific series instead of forcing a generic piece to fit.
We don’t stock CGI parts locally. Each job is sized and sourced to your window so the fit stays true. If the frame is cracked, bowed past tolerance, or the sealed unit has failed across the whole window, replacement is the honest call and we’ll tell you plainly. Where repair makes sense, we say so. Call (844) 560-0350 and we’ll give you a straight read before you spend anything.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We check the balance, pivot shoes, frame square, track, and glazing seal on your CGI unit. On a hung window, that means operating it through its full travel and watching for binding, not just a visual glance.
- 2
Repair or install. If it’s a repair, we fit the correct CGI-matched hardware and confirm the sash seats and seals. For replacement, we measure the opening twice and match the series profile so the new unit fits the rough opening without forcing stucco or frame rebuilds.
- 3
Test. We operate every window and door through its range, confirm the weatherstrip seals at jamb and meeting rail, and check that rollers track cleanly on sliders.
- 4
Warranty. Both manufacturer warranty layers are registered in writing, durations stated, before we leave. The 90-Day Done Right Promise covers the work that follows.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Boulder City
We cover the CGI lines Boulder City homeowners actually have on their homes: Sentinel Series vinyl single-hung and double-hung windows, the Impact Series vinyl impact windows in single-hung, double-hung, and horizontal roller, the Series 7000 and 8000 vinyl sliding and casement windows, and CGI vinyl patio sliding doors and entry door systems. Whether you need a single balance replaced on a Sentinel or a full run of Impact Series units for a wind-facing wall, we handle both. If you’re unsure which CGI series you have, a photo of the label or the frame corner is usually enough to identify it.
We Also Service These Brands
CGI is one brand among many, and being independent means we’re not tied to a single product line. We also service PGT, CWS, ES Windows, and ECO Window Systems, along with Andersen, Pella, Marvin, Milgard, and Jeld-Wen as an authorized installer. If your home has a mix of brands, we can work on all of them in one visit.
FAQs – CGI Windows & Doors Service in Boulder City
No. TruePane Windows & Doors Boulder City is an independent CGI service provider and is not affiliated with or authorized by CGI. We work on CGI products as an independent installer and repair company, which means we give you an honest repair-versus-replace read rather than steering you toward a new sale.
Yes. We use CGI OEM or exact-match aftermarket balances, rollers, weatherstrip, and glazing seals so your window keeps its original fit and warranty position. Parts are sourced per job for your specific series. Call (844) 560-0350 and we’ll tell you what your unit needs.
Most single-window repairs, like a balance or weatherstrip swap, are completed in one visit, often within the hour. Glazing-pack replacements and impact-unit work may take longer depending on the glass order. We’ll give you the timeline upfront so nothing is left hanging.
We service Sentinel Series single- and double-hung, Impact Series vinyl units in single-hung, double-hung, and horizontal roller, Series 7000/8000 sliding and casement windows, and CGI patio sliding and entry doors. If you don’t know your series, a photo of the frame label usually identifies it.
Repairs done with CGI-compatible parts and proper technique generally preserve your warranty position, but the terms depend on your specific CGI warranty document. We register both manufacturer warranty layers in writing under The Keystone Standard so you have the record. Call (844) 560-0350 for a free estimate before anything is done.
A typical CGI balance or hardware repair runs roughly $150 to $325, a glazing-pack swap about $200 to $450, weatherstrip replacement $120 to $280, roller and track work on a horizontal slider $180 to $350, and full unit replacement from roughly $550 to $1,200 depending on series and size. Actual pricing depends on the specific model and condition. Call (844) 560-0350 for an exact quote; estimates are free.
Book Your CGI Service in Boulder City, NV
If your CGI windows or doors are binding, fogging, dragging, or letting in desert air, call TruePane Windows & Doors Boulder City at (844) 560-0350. We’ll diagnose the issue, give you a square deal upfront, and tell you honestly whether a repair or replacement is the right call. Estimates are free, and a live person answers the phone 24 hours a day.
Written by the team at TruePane Windows & Doors Boulder City.